Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)
which host to connect to. Assuming you are running the software on the server with the HBA(s) installed, keep the default name of “local- host” as the host name, and click Connect.
On the GUI, the left pane displays discovered iSCSI HBAs. Click on the desired HBA in order to change its settings. The GUI defaults to the HBA Options dialog selected with the row of tabs at the top.
From the HBA Options dialog, you can set the iSCSI HBA parame- ters including IP address, subnet mask, and gateway. If an iSNS server is being used for your iSCSI configuration follow the proce- dure for setting up iSNS later in Configuring iSNS settings for QLA4010 on page
Using the QLogic iSCSI SANSurfer Application to Configure iSCSI Devices | |
|
|
4