EMC 4K VA 20K VA UPS installation manual Important Safety Instructions Save These Instruction

Page 2

CONTENTS

1.

Introduction

1

2.

System description

1

 

2.1

General description

1

 

2.2

System configuration

3

3.

Safety information

4

4.

Storage

5

5.

Installation

5

 

5.1

Environment

5

 

5.2

Rear panel views

6

 

5.3

Connection to mains and loads (4000 - 20000 VA)

12

 

5.4

Default settings at the factory

16

6.

Computer and alarm connections

17

 

6.1

EPO port (emergency power off)

18

7.

User’s guide to operations

18

 

7.1

Starting and shutting down the UPS

18

 

7.2

Button operation

19

 

7.3

Control panel functions

20

 

7.4

Interpreting UPS messages

25

 

7.5 Trouble shooting

26

8.

Maintenance

27

9.

Technical Specifications

28

10. VGD RM 6KVA(3U+3U) Mechanical

34

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTION

CAUTION (UPS Having Internal Batteries): Risk of electric shock - Hazardous live parts inside this unit are energized from the battery supply even when the input AC power is disconnected.

CAUTION (No User serviceable Parts): Risk of electric

shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

CAUTION (Non-isolated Battery supply): Risk of electric

shock, battery circuit is not isolated from AC input, hazardous voltage may exist between battery terminals and ground. Test before touching.

WARNING (Fuses): To reduce the risk of fire, replace only with the same type and rating of fuse.

WARNING: Intend for installation in a controlled environment.

CAUTION: Do not dispose of batteries in a fire, the battery may explore.

CAUTION: Do not open or mutilate the battery, released electrolyte is harmful to the skin and eyes.

CAUTION: A battery can present a risk of electric shock and high short circuit current. The following precaution should be observed when working on batteries

Remove watches, rings or other metal objects. Use tools with insulated handles.

To reduce the risk of electric shock, disconnect the UPS from the mains supply before installing a computer interface signal cable. Reconnect the powers cord only after signaling interconnections have been made.

Servicing of batteries should be performed or supervised by personnel knowledge of batteries and the required precautions. Keep unauthorized personnel away from batteries.

II

III

Image 2
Contents 4K VA 20K VA UPS Declaration of Conformity RequestImportant Safety Instructions Save These Instruction General description IntroductionSystem description Diagnostic tests System configurationFree Run Mode Efficiency Optimizer functionStorage Safety informationInstallation EnvironmentRear panel views 6KVA Rear panel With ISO 8K~10KVA Rear panel Without ISO 8K~10 KVA 12KVA Rear panel ISO and With ISO Connection to mains and loads 4000 20000 VA Or kill personnel and damage equipmentOnly required if demanded by that of local wiring rules Connecting the UPS to a Computer Computer and alarm connectionsDefault settings at the factory RS-232 Standard Interface portStarting and shutting down the UPS EPO port emergency power offUser’s guide to operations Button operationUPS meters display Control panel functionsNormal display LCD messageUPS configurations Manual test of the UPSInterpreting UPS messages Alarm indicatorsSilencing an alarm Maintenance Trouble shootingTechnical Specifications For model with 3 Phase in 1 Phase outFor Rack mount model 6K-ISO TB Connect the Battery cabinet to UPS VGD RM 6KVA3U+3U MechanicalPage Tower installation Wall installation Installation with rear Bracket