Extron electronic MTP 15HD RSA manual Reference Information, Specifications

Reference

Information

This section provides the specifications and part numbers for the

PowerCage MTP T 15HD RSA and MTP R 15HD RSA SEQ modular boards.

•Specifications

•Part Numbers

Specifications

Video — PowerCage MTP T 15HD RSA, PowerCage MTP R 15HD RSA SEQ

Gain	Unity
Number/signal type	1 set of proprietary analog signals
Connector	1 female RJ-45

Video input — PowerCage MTP T 15HD RSA

Number/signal type	1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (YUVi or YUVp/HDTV),
	S-video, or composite video
Connector	1 female 15-pin HD
Nominal levels	1 Vp-p for Y of component video and S-video, and for composite video
	0.7	Vp-p for RGB and for R-Y and B-Y of component video
	0.3	Vp-p for C of S-video
Minimum/maximum levels	0.3	V to 1.45 Vp-p
Impedance	75 ohms
Horizontal frequency	15 kHz to 130 kHz
Vertical frequency	30 Hz to 150 Hz
Return loss	<-30 dB @ 5 MHz
DC offset (max. allowable)	250 mV

Video output — PowerCage MTP R 15HD RSA SEQ

Number/signal type	1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs,
	component video (YUVi or YUVp/HDTV), S-video, or composite video
Connector	1 female 15-pin HD
Nominal levels	1 Vp-p for Y of component video and S-video, and for composite video
	0.7	Vp-p for RGB and for R-Y and B-Y of component video
	0.3	Vp-p for C of S-video
Minimum/maximum levels	0.3	V to 1.45 Vp-p
Impedance	75 ohms
Return loss	<-30 dB @ 5 MHz
DC offset	<±25 mV with input at 0 offset
Skew compensation	62 ns
Maximum resolution	Up to 1920x1200 or 2048x1080 or 1080p at 300 ft
	Up to 1024x768 at 600 ft

NOTE: Refer to page 7 in this guide for maximum distances recommended for specific resolutions.

PowerCage MTP T 15HD RSA and PowerCage MTP R 15HD RSA SEQ • Reference Information 12