COMMAND | ASCII RESPONSE DESCRIPTION |
Vertical shift
Specific value | X2 / | Vph X2 |
Increment up | {/ | Vph+ |
Increment down | }/ | Vph– |
Selects vertical shift X2 Shift image up one step Shift image down one step
Set output rate
X3 = | Rte |
X3
Set the video output rate
Freeze
Enable | F | Frz 1 | Set freeze mode to On (freeze current displayed image) |
Disable | f | Frz Ø | Set freeze mode to Off |
Executive mode
Enable | X | Exe 1 | Set executive mode to On |
Disable | x | Exe Ø | Set executive mode to Off |
Query software version
q | (Same as Q below) | |
Q | Ver x.xx | Example response: Ver 3.2 |
Still mode
X4
#Stl
X4
Sets still mode On or Off
Detail mode
X6
D Det
X6
Sets detail mode to level 1 (low), 2, or 3 (high)
Request part number
n | (Same as N below) |
N |
Request information*
i | (Same as I below) |
IC X1 •Col X2 •Tin X2 •Con X2 •Brt X2 •Hph X2 •Vph X2 •Rte X3 •Frz X4
•Exe X4 •Typ X5 •Stl X4 •Det X6
*Typ X5 entry.
displays the type of input video signal as automatically sensed by the scaler. You cannot change this
Control Software for Windows
The Signal Enhancement Products Control Program (part #
Installing the software
The program is contained on a single
To install the software from the floppy disk onto the hard drive, run SETUP.EXE from the floppy disk, and follow the instructions that appear on the screen. The program occupies approximately 1 MB (megabyte) of
By default, the Windows installation creates a C:\S_ENHANC directory, and it places two icons (Signal Enhancement Products Control Pgm and Signal Enhancement Products Help) into a group or folder named “Extron Electronics”.
DVS 150 Serial Communication |