Extron electronic MVX 84, MVX 88, MVX 44, 48 manual Using Presets

Page 26

4.Deselect video and select audio: Press and release the I/O button.

The video LED is off when video is deselected.

The audio LED lights when audio is selected.

Press the button.

OUTPUTS

I/O

1

2

3

4

5

6

7

8

 

VID +dB

AUD -dB

The Output 3 LED lights to indicate that output 3 is selected and it is receiving audio. The source is indicated by the Input LED.

The Output 8 LED also lights to indicate that output 8 is receiving audio from the indicated input.

INPUTS

5

The Input 5 LED lights to indicate that the audio from this input is tied to output 3 (and to all the other lit outputs).

5.Allow the 5-second input and output button timeout to deselect the output.

Using Presets

The current configuration (configuration 0) can be saved as a preset in any one of 16 preset memory addresses. Each switcher has as many presets available from the front panel as it has input and output buttons. For example, the MVX 44 has 8 presets (4 input buttons and 4 output buttons) available from the front panel and the MVX 88 has 16 (8 input buttons and 8 output buttons). Figure 11 on the next page identifies preset numbers available from the front panel for each matrix size; preset numbers above those listed are available under RS-232 or IR control only (see the “Remote Operation” section).

NOTES: • Only the audio and video ties are stored and recalled; audio gain settings are

not saved, and they do not change when a preset is recalled.

• Presets cannot be viewed from the front panel unless they are recalled as

the current configuration. Presets can be viewed using the Extron Matrix

Switchers Control Program (see the “Remote Operation” section).

• The current configuration and all presets are stored in non-volatile memory.

When power is removed and restored, the current configuration is still active

and all presets are retained.

• When a preset is recalled, it replaces the current configuration, which is lost unless it is also stored as a preset. The recalled preset overwrites all of the current configuration ties in favor of the preset configuration ties.

• All models have 16 presets; on models with fewer than 16 input and output buttons, preset numbers that are too high to be available from the front panel are still accessible under serial port or Ethernet control.

MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation 20

Page 25 Page 27
Image 26
Page 25 Page 27
Contents MVX 44 / 48 / 84 / 88 Series Safety Instructions English FCC Class a Notice Extron Electronics. All rights reserved Conventions Used in this GuideVariables are written in slanted form as shown here Contents MVX 44 / 48 / 84 / 88 VGA Matrix Switchers Contents About the Switchers About this GuideFeatures Any input to any or all outputsMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Introduction Mounting the Switcher Cabling and Rear Panel ViewsVideo and Audio Input Connections Video and Audio Output ConnectionsRemote Connection RS-232 Port Pin AssignmentPower Connection Front Panel Controls and Indicators MVX 88 VGA a Front PanelPower/data/audio LED Infrared Sensor and Power/audio/data LEDInput and Output Selection Controls and Indicators Control Buttons and LEDs Selection and Audio/video Controls and IndicatorsO and Audio Setup button Video/+dB LED and Audio/-dB LEDMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Operation Definitions Powering up the SwitcherOperations Select an input Press and release the input 5 button Creating a Set of TiesExample 1 Create a set of video and audio ties Example 1 Configuration Confirm the change Press and release the Enter buttonExample 2 Add a video tie to a set of video and audio ties Select the output Press and release the output 1 buttonExample 3 Remove a tie from a set of ties Select the output Press and release the output 4 buttonViewing the Configuration Example 4 View ties by selecting an inputDeselect audio Press and release the I/O button Example 5 View ties by selecting outputs Press and release the Output 3 buttonUsing Presets Example 6 Save a preset Preset Locations by Matrix SizeExample 7 Recall a preset Adjusting Input Audio Gain and Attenuation Audio Gain and AttenuationExample 8 Adjust the input audio gain SecondsInput 5 LED lights to Adjust the Input Audio Level Example 9 Resetting audio gain single input Setting the Output Audio Level Front Panel Security Lockout Executive ModeClearing all Ties and Presets Clear all Ties and PresetsResetting the System to Factory Defaults MemoryTroubleshooting Optimizing the AudioWorksheets Worksheet Example 1 System EquipmentWorksheet Example 2 Daily Configuration Worksheet Example 2 Daily ConfigurationWorksheet Example 3 Test Configuration Worksheet Example 3 Test ConfigurationConfiguration Worksheet Output destinationsIR Remote Control Small Matrix IR Remote ControlSimple Instruction Set Control Host-to-Switcher InstructionsSwitcher-initiated Messages Commands are not case sensitive Switcher Error ResponsesUsing the Command and Response Table X1 = Symbol definitionsCommand and Response Table for SIS Commands X1! =Command/Response Table for SIS Commands Save, recall, and directly write global presets Directly write a global presetView ties, gains, mutes, and presets RGB delayFirmware upload Front panel lockout Executive modeResets Information requestsLoading Firmware Using an SIS Command Click the Files of type drop box and select All filesSelect the Firmware Upgrade File Matrix Switchers Control Program Installing the SoftwareStarting the Software Using the SoftwareTo run the Matrix Switchers Control Program, click Comm Port Selection window appearsMatrix Switchers Control Program Window no Ties Location of Firmware Upgrade Files Updating the FirmwareDownloading Firmware Upgrade Files Extron Firmware Loader Window Click Exit to close the Firmware Loader Windows Buttons, Drop Boxes, and Trash CanWindows menus Tools menu Audio Input Configuration selection Master-Reset selection Choose Emulate, and click OK Using Emulation ModeUsing the Help System Specifications Reference InformationVideo output Audio input MVX Part Numbers Part Numbers and AccessoriesMatrix switcher part numbers Part Number Included PartsBulk cable and termination tools Optional AccessoriesCables VGA male-to-male with audio cables Part Number Terminated cable assembliesVGA male-to-male cables Part Number VGA male-to-female cables Part NumberMounting Instructions Tabletop UseUL Rack-Mounting Guidelines Asia Middle East USA, Canada, South America Japan Central AmericaEurope, Africa, and the Middle China East Europe
Related manuals
Manual 78 pages 29.23 Kb

48, MVX 84, MVX 44, MVX 88 specifications

Extron Electronics is a prominent leader in high-quality AV technology solutions, renowned for its innovative product lines designed to address diverse connectivity and distribution needs. Among their array of offerings, the MVX series stands out, particularly the MVX 44, MVX 84, and MVX 88 models, which cater to various AV signal routing needs within educational institutions, corporate environments, and large spaces.

The Extron MVX 44 is a 4x4 matrix switcher designed for routing HDMI, VGA, and audio signals. One of its key features is its ability to deliver high-resolution video up to 1080p, making it ideal for modern multimedia presentations. The MVX 44 supports EDID management, ensures compatibility with a range of source devices, and features automatic switching capabilities. It also includes a user-friendly interface for seamless operation, allowing simultaneous switching of multiple input sources to multiple outputs.

Expanding on the capabilities of the MVX 44, the MVX 84 and MVX 88 models provide enhanced functionality with additional inputs and outputs. The MVX 84 offers support for up to 8 input sources and 4 output destinations, while the MVX 88 offers 8x8 routing of signals. Both models maintain superior video quality and high-performance signal processing, accommodating more extensive AV systems. They also share features such as HDCP compliance to secure content protection, ensuring that the highest quality video signals are transmitted without degradation.

Technologically advanced, these switchers incorporate Extron's exclusive technologies, such as the Advanced Color Processing for superior color fidelity and signal reliability. Additionally, the Series comes equipped with optional control and integration capabilities, enabling connection to various AV control systems for centralized management.

The Extron MVX series matrices are built with the robustness expected from Extron products, ensuring long-term reliability in demanding environments. The integration of state-of-the-art support for audio signals allows not only video but also audio distribution, making them versatile for any AV setup. In summary, with their rich feature set, impressive scalability, and superior video processing capabilities, the Extron MVX 44, MVX 84, and MVX 88 present compelling solutions for anyone looking to streamline AV signal management in professional setups.
Top Page Image Contents