Extron electronic manual SMD 101 Rear Panel Reset, Modes 4

Page 18

SMD 101 Rear Panel Reset

The Reset button on the rear panel of the SMD 101 (see Figure 3 on page 9) returns the SMD 101 to various modes of operation.

To select different reset modes, use a pointed stylus or small screwdriver to press and hold the Reset button while the SMD 101 is powered, or press and hold the Reset button while applying power to the SMD 101.

ATTENTION: Review the reset modes carefully. Some reset modes delete all user loaded content and revert the device to default configuration. The SMD 101 Reset Summary on page 83 provides a summary of the reset modes and the configuration settings affected by each mode.

NOTES:

•The reset modes close all open IP and Telnet connections and all sockets.

•Each reset mode is a separate reset (not a continuation from mode 1 to mode 5).

•Reset modes 2 and 3 are not available for the SMD 101.

•The SMD 101 can also be reset using the web-based user interface (see Reset Device on page 42).

•For information on resetting the SMD 101 using SIS commands, see Resets on page 68 of the Command and Response Tables section.

•Further details comparing the reset modes and affected configuration settings and user content are in the reference section (see SMD 101 Reset Summary on page 83).

Mode 1

Press and hold

RESET

Apply power

RESET

 

Release Reset button.

the Reset button.

 

to the SMD 101.

 

 

Modes 4 and 5

 

Reset LED flashes

Release, then immediately

 

press and release again. Reset

 

twice or three times.

 

 

LED flashes, then goes off.

 

 

 

Press and hold for

RESET

RESET

RESET

 

 

 

6 or 9 seconds.

 

 

 

Figure 9. Resetting the SMD 101

SMD 101 • Panels and Cabling

12

Page 17 Page 19
Image 18
Page 17 Page 19
Contents User Guide Safety Instructions Sicherheitsanweisungen DeutschFCC Class a Notice Registered TrademarksConventions Used in this Guide Specifications AvailabilitySoftware Commands NotificationsContents SMD 101 Contents About this Guide About the SMDExtron SMD Video Output Output Resolution and Edid Support Table GHz dual-core processor Suggested PC RequirementsSupported formats Microsoft Windows XP or higher Mac OS X 10.6 or higherFeatures SMD 101 Introduction Front Panel Features This section provides information onFront panel of the SMD 101 is shown in below Rear Panel Features Rear panel of the SMD 101 is shown in belowPower Supply Connection IR In Wiring SMD 101 Rear Panel Reset Modes 4SMD 101 Power Up Procedure Hardware Setup OverviewAccessing the Web-based User Interface Overview of the Web-based User InterfaceThis section provides information about Overview Player Page All Panels OpenPlayer Player ControlsMute controls Load PlayPlaylist field Source format BrowserSource field Output formatBrowser Panel Streams Browser Panel, StreamsLoad Browser Panel FilesFilter Loads the selected stream for playingNetwork Shares Network SharesLists Lists Panel Channels tabLists Panel Favorites Lists Panel, Favorites TabLists Panel History Files are not deleted, only the history entryPlaylist Editor Playlist PropertiesPlaylist Clip Properties SMD 101 Web-based User Interface Configuration Video ConfigurationGeneral Video Settings Panel Buffer Settings panel Hdmi Output panelAudio Configuration Configuration Audio ControlsOn Screen Display Status Information PanelAutomation Progress Bar PanelBoot play Screen Saver panelFailover Advanced Configuration Ethernet Settings panelConnection Ethernet Diagnostics panel Network Port Mapping panelSerial RS-232 Settings panel Firmware LoaderConfiguration panel Firmware panelConfiguration Files Exec/Power Mode Power Mode PanelControl Options Panel Password Date and TimeView only access all selections are dimmed PlayerReset Device Device Reset, Reset OptionsPassword Management panel Snmp panelDevice Information Factory Defined Information panelDisplays both device factory and user defined information Status User Defined Information PanelNetwork Statistics panel Device Status panel Local Storage panelBrowser Idle Advanced Player Configuration Loading Content to Local Storage Using SftpSftp Site Manager Dialog PC file uploads to Play Video on Demand Play Video from a Network ShareBrowser Shares Folder Push Streaming Unicast Port Numbers SME 100 Stream DiscoveryRtsp Multicast Pull Streaming MulticastHttp Connection to an SME Connecting to Streams Without SAP AnnouncementsUDP or RTP Connections SMD 101 also supports the URI formatsAdd the SME 100 user name and password RTSP//SME100IP/extronHTTP//SME100IP/web/multicast.sdp IR Remote Control RS-232 Port LAN port defaultsConnection Options RS-232 protocolFront Panel Configuration Port To connect the SMD 101 to a host computerLAN Ethernet Port Ethernet ConnectionVerbose Mode Connection TimeoutsTo Establish a Network Connection to the SMD Host-to-device Communications Password InformationUsing the Command and Response Tables SMD 101-initiated MessagesError Responses SMD 101 Remote Communication and Control Symbol definitions =default Onscreen display timeout 0 to=disabled Aspect ratio settingsPreset1urirtsp//10.13.193.170 Enclose the URI in quotes even when itName, preset number, and Media URI IR input 0=disabled, 1=front panelX2@ CV Command and Response TablesBasic SIS Commands X2@X60# Command and Response Table for Basic SIS CommandsX60@ X60$Snmp port Telnet portWeb port SSH portMD  Restart networkX1# EX1@X1@ X60EX58 EX57 * X1$EX57 X58X60 Snmp X60% SnmpX60% X51Ipa X3# Player SIS CommandsFile Commands Ipu X3#Command and Response Table for Player SIS Commands X59@ X59#X59 X59$TvprT X59 User PresetsX59&T TvprR X59 FavoritesGet X60! entries prior  G X60* X60!HISTX61@ Delete X60 Entries priorX56# X52X54 Screen SaverX55V Vol X54@X52@ Outputs VideoParts and Accessories Mounting the SMDTabletop Use Table or Wall Mounting Rack MountingFurniture Mounting UL Rack Mounting GuidelinesSMD 101 Reset Summary FirmwareSIS Optimum Network Share Performance Network Shares DialogConfiguring Windows 7 for Network File Sharing Media Properties dialog box reopens SMD 101 Reference Information SMD 101 Reference Information Click Network and Sharing Center SMD 101 Reference Information Copying Config Files Using Internet Explorer Click OK to start using the program DataViewerStarting the DataViewer program Glossary SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information Extron Warranty
Related manuals
Manual 8 pages 3.73 Kb

SMD 101 specifications

Extron Electronics has long been a prominent name in the realm of audio-visual solutions, and the SMD 101 is a prime example of its innovation in display management technology. The SMD 101 is a compact and versatile AV signal processor and distribution device designed to optimize the performance of modern AV systems.

One of the standout features of the SMD 101 is its ability to handle multiple video resolutions and formats, making it compatible with a wide range of sources and displays. This flexibility ensures that users can connect various components seamlessly, irrespective of their video standards. The SMD 101 supports HDMI signals, including embedded audio, while also offering the capability to manage audio signals separately, providing a comprehensive solution for users who demand high-quality sound alongside their visual content.

Another significant characteristic of the SMD 101 is its powerful scaling technology. With advanced scaling algorithms, it ensures that all video signals are converted to optimal resolutions without sacrificing image quality. This feature is particularly beneficial in environments where content from different sources is displayed simultaneously, maintaining consistent clarity and detail across diverse display types.

Moreover, the SMD 101 integrates Extron's advanced EDID management to streamline the communication between source devices and displays. This technology helps to minimize configuration issues and ensures that the best possible video output is achieved. The device also includes sophisticated audio features, such as audio de-embedding and mixing, enabling users to tailor the audio output to fit their specific requirements.

In terms of connectivity, the SMD 101 provides multiple input and output options, allowing for extensive system integration. The device interfaces easily with various control systems, giving users the ability to automate and manage their AV environments efficiently. It also supports Extron's control system protocols, enhancing its adaptability within existing setups.

Built to last, the SMD 101 features a robust design that ensures reliability in demanding environments. Its compact form factor allows for easy installation in racks, under tables, or in other tight spaces.

Overall, the Extron SMD 101 stands out as a comprehensive solution for AV signal processing and distribution, combining sophisticated features with user-friendly operation. Its cutting-edge technologies make it a powerful tool for any modern AV application, from corporate settings to educational institutions.
Top Page Image Contents