Extron electronic SMD 101 manual Rack Mounting, Furniture Mounting, Table or Wall Mounting

Page 88

Rack Mounting

For optional rack mounting, do not install the rubber feet. Mount the SMD 101 on a 19 inch universal or basic rack shelf. Follow the instructions included with the rack mount kit to install the SMD 101.

UL Rack Mounting Guidelines

The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the SMD 101 in a rack.

1.Elevated operating ambient temperature — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment can be greater than room ambient temperature. Therefore, install the unit in an environment compatible with the maximum ambient temperature (Tma = +122 °F, +50 °C) specified by Extron.

2.Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is not compromised.

3.Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.

4.Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5.Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (e.g. use of power strips).

Furniture Mounting

Furniture mount the SMD 101 using an optional under‑desk or through‑desk mounting kit. Follow the instructions included with the mounting kit.

Table or Wall Mounting

Extron table or wall mounting brackets extend approximately 1/4 inch (6.4 mm) above the top surface of the SMD 101 enclosure. This design allows for an air space between the mounting surface and the enclosure. Follow the instructions included with the mounting kit.

SMD 101 • Reference Information

82

Page 87 Page 89
Image 88
Page 87 Page 89
Contents User Guide Safety Instructions Sicherheitsanweisungen DeutschFCC Class a Notice Registered TrademarksSpecifications Availability Software CommandsConventions Used in this Guide NotificationsContents SMD 101 Contents About this Guide About the SMDExtron SMD Video Output Output Resolution and Edid Support Table Suggested PC Requirements Supported formatsGHz dual-core processor Microsoft Windows XP or higher Mac OS X 10.6 or higherFeatures SMD 101 Introduction This section provides information on Front Panel FeaturesFront panel of the SMD 101 is shown in below Rear Panel Features Rear panel of the SMD 101 is shown in belowPower Supply Connection IR In Wiring SMD 101 Rear Panel Reset Modes 4SMD 101 Power Up Procedure Hardware Setup OverviewOverview of the Web-based User Interface Accessing the Web-based User InterfaceThis section provides information about Overview Player Page All Panels OpenPlayer Player ControlsLoad Play Mute controlsPlaylist field Browser Source fieldSource format Output formatBrowser Panel Streams Browser Panel, StreamsBrowser Panel Files FilterLoad Loads the selected stream for playingNetwork Shares Network SharesLists Lists Panel Channels tabLists Panel Favorites Lists Panel, Favorites TabLists Panel History Files are not deleted, only the history entryPlaylist Editor Playlist PropertiesPlaylist Clip Properties SMD 101 Web-based User Interface Video Configuration ConfigurationGeneral Video Settings Panel Buffer Settings panel Hdmi Output panelAudio Configuration Configuration Audio ControlsOn Screen Display Status Information PanelAutomation Progress Bar PanelScreen Saver panel Boot playFailover Ethernet Settings panel Advanced ConfigurationConnection Ethernet Diagnostics panel Network Port Mapping panelSerial RS-232 Settings panel Firmware LoaderConfiguration panel Firmware panelConfiguration Files Power Mode Panel Exec/Power ModeControl Options Panel Password Date and TimeView only access all selections are dimmed PlayerReset Device Device Reset, Reset OptionsPassword Management panel Snmp panelFactory Defined Information panel Device InformationDisplays both device factory and user defined information User Defined Information Panel StatusNetwork Statistics panel Device Status panel Local Storage panelBrowser Idle Advanced Player Configuration Loading Content to Local Storage Using SftpSftp Site Manager Dialog PC file uploads to Play Video on Demand Play Video from a Network ShareBrowser Shares Folder SME 100 Stream Discovery Rtsp Multicast Pull StreamingPush Streaming Unicast Port Numbers MulticastConnecting to Streams Without SAP Announcements UDP or RTP ConnectionsHttp Connection to an SME SMD 101 also supports the URI formatsRTSP//SME100IP/extron Add the SME 100 user name and passwordHTTP//SME100IP/web/multicast.sdp IR Remote Control LAN port defaults Connection OptionsRS-232 Port RS-232 protocolFront Panel Configuration Port To connect the SMD 101 to a host computerLAN Ethernet Port Ethernet ConnectionConnection Timeouts Verbose ModeTo Establish a Network Connection to the SMD Password Information Using the Command and Response TablesHost-to-device Communications SMD 101-initiated MessagesError Responses SMD 101 Remote Communication and Control Symbol definitions Onscreen display timeout 0 to =disabled=default Aspect ratio settingsEnclose the URI in quotes even when it Name, preset number, and Media URIPreset1urirtsp//10.13.193.170 IR input 0=disabled, 1=front panelCommand and Response Tables Basic SIS CommandsX2@ CV X2@Command and Response Table for Basic SIS Commands X60@X60# X60$Telnet port Web portSnmp port SSH portMD  Restart networkEX1@ X1@X1# X60EX57 * X1$ EX57EX58 X58X60% Snmp X60%X60 Snmp X51Player SIS Commands File CommandsIpa X3# Ipu X3#Command and Response Table for Player SIS Commands X59# X59X59@ X59$User Presets X59&T TvprR X59TvprT X59 Favorites G X60* X60!HIST X61@Get X60! entries prior Delete X60 Entries priorX52 X54X56# Screen SaverX54@ X52@X55V Vol Outputs VideoMounting the SMD Parts and AccessoriesTabletop Use Rack Mounting Furniture MountingTable or Wall Mounting UL Rack Mounting GuidelinesSMD 101 Reset Summary FirmwareSIS Optimum Network Share Performance Network Shares DialogConfiguring Windows 7 for Network File Sharing Media Properties dialog box reopens SMD 101 Reference Information SMD 101 Reference Information Click Network and Sharing Center SMD 101 Reference Information Copying Config Files Using Internet Explorer DataViewer Click OK to start using the programStarting the DataViewer program Glossary SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information Extron Warranty
Related manuals
Manual 8 pages 3.73 Kb

SMD 101 specifications

Extron Electronics has long been a prominent name in the realm of audio-visual solutions, and the SMD 101 is a prime example of its innovation in display management technology. The SMD 101 is a compact and versatile AV signal processor and distribution device designed to optimize the performance of modern AV systems.

One of the standout features of the SMD 101 is its ability to handle multiple video resolutions and formats, making it compatible with a wide range of sources and displays. This flexibility ensures that users can connect various components seamlessly, irrespective of their video standards. The SMD 101 supports HDMI signals, including embedded audio, while also offering the capability to manage audio signals separately, providing a comprehensive solution for users who demand high-quality sound alongside their visual content.

Another significant characteristic of the SMD 101 is its powerful scaling technology. With advanced scaling algorithms, it ensures that all video signals are converted to optimal resolutions without sacrificing image quality. This feature is particularly beneficial in environments where content from different sources is displayed simultaneously, maintaining consistent clarity and detail across diverse display types.

Moreover, the SMD 101 integrates Extron's advanced EDID management to streamline the communication between source devices and displays. This technology helps to minimize configuration issues and ensures that the best possible video output is achieved. The device also includes sophisticated audio features, such as audio de-embedding and mixing, enabling users to tailor the audio output to fit their specific requirements.

In terms of connectivity, the SMD 101 provides multiple input and output options, allowing for extensive system integration. The device interfaces easily with various control systems, giving users the ability to automate and manage their AV environments efficiently. It also supports Extron's control system protocols, enhancing its adaptability within existing setups.

Built to last, the SMD 101 features a robust design that ensures reliability in demanding environments. Its compact form factor allows for easy installation in racks, under tables, or in other tight spaces.

Overall, the Extron SMD 101 stands out as a comprehensive solution for AV signal processing and distribution, combining sophisticated features with user-friendly operation. Its cutting-edge technologies make it a powerful tool for any modern AV application, from corporate settings to educational institutions.
Top Page Image Contents