Extron electronic SMD 101 Connecting to Streams Without SAP Announcements, UDP or RTP Connections

Page 60

Connecting to Streams Without SAP Announcements

For a source that is not configured for SAP announcements (such as IP cameras), the RTSP (pull) stream URI is entered directly in the Source field of the SMD 101 player controls. The URI prefix (udp in the example below) corresponds to the streaming method.

UDP or RTP Connections

To connect the SMD 101 to a stream using the destination port of the encoder, use the following template:

udp://@:<destination port>

For example, to connect to a SME 100 stream, enter the following URI in the SMD 101

Source field (see Source field on page 18):

udp://@:60000

The SMD 101 also supports the URI formats:

rtp://192.168.254.254@192.168.254.254:60000

and

rtp://@192.168.254.254:60000

HTTP Connection to an SME 100

To connect SME 100 unicast or multicast push streams over HTTP, use the following templates.

For unicast streams with no password, the URI format is: http://<sme100_ip>/web/output1.sdp.

For multicast RTP over UDP RTSP (pull) streams with no credentials set, the URI format is: http://<sme100_ip>/web/multicast.sdp.

NOTE: A typical IPv4 address for an SME 100 device on a private network is 192.168.nnn.nnn or 10.nnn.nnn.nnn). A multicast address is in the range 224.nnn.nnn.nnn to 239.nnn.nnn.nnn.

If the encoder has an active admin password, it challenges the connection. An admin or user password is required for connection. To play the stream, the user name and password must be embedded in the URI entered in the Source field.

For unicast or multicast PUSH streams with a password, the URI format is: http://user:password@<sme100_ip_adr>/web/output1.sdp.

For multicast RTP over UDP RTSP (pull) streams with a password, the URI format is: http://user:password@<sme100_ip_adr>/web/output1/multicast.sdp.

In the following example, connect to a unicast RTSP over UDP stream broadcast from the SME 100 in figure 49 on page 53, using an admin password “123456”.

1.Locate the HTTP stream in the streams browser (see Player Page on page 16).

2.Drag and drop the stream into the player panel. An error message indicates the stream load failed. The URI of the stream is shown in the Source: field.

3.Click the ellipsis (...) to open the full file path.

http:192.168.254.254/web/extron.sdp

SMD 101 • Advanced Player Configuration

54

Page 59 Page 61
Image 60
Page 59 Page 61
Contents User Guide Safety Instructions Sicherheitsanweisungen DeutschFCC Class a Notice Registered TrademarksSpecifications Availability Software CommandsConventions Used in this Guide NotificationsContents SMD 101 Contents About this Guide About the SMDExtron SMD Video Output Output Resolution and Edid Support Table Suggested PC Requirements Supported formatsGHz dual-core processor Microsoft Windows XP or higher Mac OS X 10.6 or higherFeatures SMD 101 Introduction Front Panel Features This section provides information onFront panel of the SMD 101 is shown in below Rear Panel Features Rear panel of the SMD 101 is shown in belowPower Supply Connection IR In Wiring SMD 101 Rear Panel Reset Modes 4SMD 101 Power Up Procedure Hardware Setup OverviewAccessing the Web-based User Interface Overview of the Web-based User InterfaceThis section provides information about Overview Player Page All Panels OpenPlayer Player ControlsMute controls Load PlayPlaylist field Browser Source fieldSource format Output formatBrowser Panel Streams Browser Panel, StreamsBrowser Panel Files FilterLoad Loads the selected stream for playingNetwork Shares Network SharesLists Lists Panel Channels tabLists Panel Favorites Lists Panel, Favorites TabLists Panel History Files are not deleted, only the history entryPlaylist Editor Playlist PropertiesPlaylist Clip Properties SMD 101 Web-based User Interface Configuration Video ConfigurationGeneral Video Settings Panel Buffer Settings panel Hdmi Output panelAudio Configuration Configuration Audio ControlsOn Screen Display Status Information PanelAutomation Progress Bar PanelBoot play Screen Saver panelFailover Advanced Configuration Ethernet Settings panelConnection Ethernet Diagnostics panel Network Port Mapping panelSerial RS-232 Settings panel Firmware LoaderConfiguration panel Firmware panelConfiguration Files Exec/Power Mode Power Mode PanelControl Options Panel Password Date and TimeView only access all selections are dimmed PlayerReset Device Device Reset, Reset OptionsPassword Management panel Snmp panelDevice Information Factory Defined Information panelDisplays both device factory and user defined information Status User Defined Information PanelNetwork Statistics panel Device Status panel Local Storage panelBrowser Idle Advanced Player Configuration Loading Content to Local Storage Using SftpSftp Site Manager Dialog PC file uploads to Play Video on Demand Play Video from a Network ShareBrowser Shares Folder SME 100 Stream Discovery Rtsp Multicast Pull StreamingPush Streaming Unicast Port Numbers MulticastConnecting to Streams Without SAP Announcements UDP or RTP ConnectionsHttp Connection to an SME SMD 101 also supports the URI formatsAdd the SME 100 user name and password RTSP//SME100IP/extronHTTP//SME100IP/web/multicast.sdp IR Remote Control LAN port defaults Connection OptionsRS-232 Port RS-232 protocolFront Panel Configuration Port To connect the SMD 101 to a host computerLAN Ethernet Port Ethernet ConnectionVerbose Mode Connection TimeoutsTo Establish a Network Connection to the SMD Password Information Using the Command and Response TablesHost-to-device Communications SMD 101-initiated MessagesError Responses SMD 101 Remote Communication and Control Symbol definitions Onscreen display timeout 0 to =disabled=default Aspect ratio settingsEnclose the URI in quotes even when it Name, preset number, and Media URIPreset1urirtsp//10.13.193.170 IR input 0=disabled, 1=front panelCommand and Response Tables Basic SIS CommandsX2@ CV X2@Command and Response Table for Basic SIS Commands X60@X60# X60$Telnet port Web portSnmp port SSH portMD  Restart networkEX1@ X1@X1# X60EX57 * X1$ EX57EX58 X58X60% Snmp X60%X60 Snmp X51Player SIS Commands File CommandsIpa X3# Ipu X3#Command and Response Table for Player SIS Commands X59# X59X59@ X59$User Presets X59&T TvprR X59TvprT X59 Favorites G X60* X60!HIST X61@Get X60! entries prior Delete X60 Entries priorX52 X54X56# Screen SaverX54@ X52@X55V Vol Outputs VideoParts and Accessories Mounting the SMDTabletop Use Rack Mounting Furniture MountingTable or Wall Mounting UL Rack Mounting GuidelinesSMD 101 Reset Summary FirmwareSIS Optimum Network Share Performance Network Shares DialogConfiguring Windows 7 for Network File Sharing Media Properties dialog box reopens SMD 101 Reference Information SMD 101 Reference Information Click Network and Sharing Center SMD 101 Reference Information Copying Config Files Using Internet Explorer Click OK to start using the program DataViewerStarting the DataViewer program Glossary SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information Extron Warranty
Related manuals
Manual 8 pages 3.73 Kb

SMD 101 specifications

Extron Electronics has long been a prominent name in the realm of audio-visual solutions, and the SMD 101 is a prime example of its innovation in display management technology. The SMD 101 is a compact and versatile AV signal processor and distribution device designed to optimize the performance of modern AV systems.

One of the standout features of the SMD 101 is its ability to handle multiple video resolutions and formats, making it compatible with a wide range of sources and displays. This flexibility ensures that users can connect various components seamlessly, irrespective of their video standards. The SMD 101 supports HDMI signals, including embedded audio, while also offering the capability to manage audio signals separately, providing a comprehensive solution for users who demand high-quality sound alongside their visual content.

Another significant characteristic of the SMD 101 is its powerful scaling technology. With advanced scaling algorithms, it ensures that all video signals are converted to optimal resolutions without sacrificing image quality. This feature is particularly beneficial in environments where content from different sources is displayed simultaneously, maintaining consistent clarity and detail across diverse display types.

Moreover, the SMD 101 integrates Extron's advanced EDID management to streamline the communication between source devices and displays. This technology helps to minimize configuration issues and ensures that the best possible video output is achieved. The device also includes sophisticated audio features, such as audio de-embedding and mixing, enabling users to tailor the audio output to fit their specific requirements.

In terms of connectivity, the SMD 101 provides multiple input and output options, allowing for extensive system integration. The device interfaces easily with various control systems, giving users the ability to automate and manage their AV environments efficiently. It also supports Extron's control system protocols, enhancing its adaptability within existing setups.

Built to last, the SMD 101 features a robust design that ensures reliability in demanding environments. Its compact form factor allows for easy installation in racks, under tables, or in other tight spaces.

Overall, the Extron SMD 101 stands out as a comprehensive solution for AV signal processing and distribution, combining sophisticated features with user-friendly operation. Its cutting-edge technologies make it a powerful tool for any modern AV application, from corporate settings to educational institutions.
Top Page Image Contents