Extron electronic SMD 101 manual Overview of the Web-based User Interface

Page 20

Web-based User

Interface

This section provides information about:

•Overview of the Web-based User Interface

•Accessing the Web-based User Interface

•Page Overview

•Player Page

•Configuration Page

•Advanced Configuration Page

•Device Information Page

•Status Page

•Browser Idle

Overview of the Web-based User Interface

The web-based user interface, accessed from a control device, can configure, remotely control, monitor, update firmware, and operate the SMD 101.

NOTE: Google Chrome was used to take the SMD 101 user interface screen shots in this user guide and is the recommended browser. Pages and panels viewed in other browsers may not appear exactly the same.

Accessing the Web-based User Interface

To access the web-based user interface, connect a control PC or viewing device to the SMD 101 and open a compatible web browser. Enter the IP address of the SMD 101 (default IP address is 192.168.254.254) into the browser address bar.

There are five pages with related controls grouped together on each page:

•Player — used to select the source (stream) and control decoding.

•Configuration — provides basic user level adjustments.

•Advanced Configuration — for initial setup and administrator use.

•Device Information — provides default setting and user defined information.

•Status — Real‑time display of operating conditions and statistics.

Access pages by selecting the tab across the top of the dialog box.

http://192.168.254.254/www/

Figure 10. Web-based User Interface, Page TabsBrowser Idle

To conserve the host PC resources, after 60 minutes, the browser accessing the SMD 101 web interface stops requesting status and video confidence updates.

This feature does not idle or affect SMD 101 operation. It suspends the automatic browser updates for the video confidence display to conserve network and PC resources. Press Resume to force the browser to reconnect to the SMD 101 and begin normal updates.

SMD 101 • Web-based User Interface

14

Page 19 Page 21
Image 20
Page 19 Page 21
Contents User Guide Safety Instructions Sicherheitsanweisungen DeutschFCC Class a Notice Registered TrademarksSpecifications Availability Software CommandsConventions Used in this Guide NotificationsContents SMD 101 Contents About this Guide About the SMDExtron SMD Video Output Output Resolution and Edid Support Table Suggested PC Requirements Supported formatsGHz dual-core processor Microsoft Windows XP or higher Mac OS X 10.6 or higherFeatures SMD 101 Introduction Front panel of the SMD 101 is shown in below Front Panel FeaturesThis section provides information on Rear Panel Features Rear panel of the SMD 101 is shown in belowPower Supply Connection IR In Wiring SMD 101 Rear Panel Reset Modes 4SMD 101 Power Up Procedure Hardware Setup OverviewThis section provides information about Accessing the Web-based User InterfaceOverview of the Web-based User Interface Overview Player Page All Panels OpenPlayer Player ControlsPlaylist field Mute controlsLoad Play Browser Source fieldSource format Output formatBrowser Panel Streams Browser Panel, StreamsBrowser Panel Files FilterLoad Loads the selected stream for playingNetwork Shares Network SharesLists Lists Panel Channels tabLists Panel Favorites Lists Panel, Favorites TabLists Panel History Files are not deleted, only the history entryPlaylist Editor Playlist PropertiesPlaylist Clip Properties SMD 101 Web-based User Interface General Video Settings Panel ConfigurationVideo Configuration Buffer Settings panel Hdmi Output panelAudio Configuration Configuration Audio ControlsOn Screen Display Status Information PanelAutomation Progress Bar PanelFailover Boot playScreen Saver panel Connection Advanced ConfigurationEthernet Settings panel Ethernet Diagnostics panel Network Port Mapping panelSerial RS-232 Settings panel Firmware LoaderConfiguration panel Firmware panelConfiguration Files Control Options Panel Exec/Power ModePower Mode Panel Password Date and TimeView only access all selections are dimmed PlayerReset Device Device Reset, Reset OptionsPassword Management panel Snmp panelDisplays both device factory and user defined information Device InformationFactory Defined Information panel Network Statistics panel StatusUser Defined Information Panel Device Status panel Local Storage panelBrowser Idle Advanced Player Configuration Loading Content to Local Storage Using SftpSftp Site Manager Dialog PC file uploads to Play Video on Demand Play Video from a Network ShareBrowser Shares Folder SME 100 Stream Discovery Rtsp Multicast Pull StreamingPush Streaming Unicast Port Numbers MulticastConnecting to Streams Without SAP Announcements UDP or RTP ConnectionsHttp Connection to an SME SMD 101 also supports the URI formatsHTTP//SME100IP/web/multicast.sdp Add the SME 100 user name and passwordRTSP//SME100IP/extron IR Remote Control LAN port defaults Connection OptionsRS-232 Port RS-232 protocolFront Panel Configuration Port To connect the SMD 101 to a host computerLAN Ethernet Port Ethernet ConnectionTo Establish a Network Connection to the SMD Verbose ModeConnection Timeouts Password Information Using the Command and Response TablesHost-to-device Communications SMD 101-initiated MessagesError Responses SMD 101 Remote Communication and Control Symbol definitions Onscreen display timeout 0 to =disabled=default Aspect ratio settingsEnclose the URI in quotes even when it Name, preset number, and Media URIPreset1urirtsp//10.13.193.170 IR input 0=disabled, 1=front panelCommand and Response Tables Basic SIS CommandsX2@ CV X2@Command and Response Table for Basic SIS Commands X60@X60# X60$Telnet port Web portSnmp port SSH portMD  Restart networkEX1@ X1@X1# X60EX57 * X1$ EX57EX58 X58X60% Snmp X60%X60 Snmp X51Player SIS Commands File CommandsIpa X3# Ipu X3#Command and Response Table for Player SIS Commands X59# X59X59@ X59$User Presets X59&T TvprR X59TvprT X59 Favorites G X60* X60!HIST X61@Get X60! entries prior Delete X60 Entries priorX52 X54X56# Screen SaverX54@ X52@X55V Vol Outputs VideoTabletop Use Parts and AccessoriesMounting the SMD Rack Mounting Furniture MountingTable or Wall Mounting UL Rack Mounting GuidelinesSMD 101 Reset Summary FirmwareSIS Optimum Network Share Performance Network Shares DialogConfiguring Windows 7 for Network File Sharing Media Properties dialog box reopens SMD 101 Reference Information SMD 101 Reference Information Click Network and Sharing Center SMD 101 Reference Information Copying Config Files Using Internet Explorer Starting the DataViewer program Click OK to start using the programDataViewer Glossary SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information Extron Warranty
Related manuals
Manual 8 pages 3.73 Kb

SMD 101 specifications

Extron Electronics has long been a prominent name in the realm of audio-visual solutions, and the SMD 101 is a prime example of its innovation in display management technology. The SMD 101 is a compact and versatile AV signal processor and distribution device designed to optimize the performance of modern AV systems.

One of the standout features of the SMD 101 is its ability to handle multiple video resolutions and formats, making it compatible with a wide range of sources and displays. This flexibility ensures that users can connect various components seamlessly, irrespective of their video standards. The SMD 101 supports HDMI signals, including embedded audio, while also offering the capability to manage audio signals separately, providing a comprehensive solution for users who demand high-quality sound alongside their visual content.

Another significant characteristic of the SMD 101 is its powerful scaling technology. With advanced scaling algorithms, it ensures that all video signals are converted to optimal resolutions without sacrificing image quality. This feature is particularly beneficial in environments where content from different sources is displayed simultaneously, maintaining consistent clarity and detail across diverse display types.

Moreover, the SMD 101 integrates Extron's advanced EDID management to streamline the communication between source devices and displays. This technology helps to minimize configuration issues and ensures that the best possible video output is achieved. The device also includes sophisticated audio features, such as audio de-embedding and mixing, enabling users to tailor the audio output to fit their specific requirements.

In terms of connectivity, the SMD 101 provides multiple input and output options, allowing for extensive system integration. The device interfaces easily with various control systems, giving users the ability to automate and manage their AV environments efficiently. It also supports Extron's control system protocols, enhancing its adaptability within existing setups.

Built to last, the SMD 101 features a robust design that ensures reliability in demanding environments. Its compact form factor allows for easy installation in racks, under tables, or in other tight spaces.

Overall, the Extron SMD 101 stands out as a comprehensive solution for AV signal processing and distribution, combining sophisticated features with user-friendly operation. Its cutting-edge technologies make it a powerful tool for any modern AV application, from corporate settings to educational institutions.
Top Page Image Contents