Extron electronic SMD 101 manual Audio Configuration, Configuration Audio Controls

Page 36

Audio Configuration

The Audio Configuration page (see figure 25) provides information and control of the analog audio output. The controls do not affect embedded audio on the HDMI output.

Analog audio can be delayed or muted. A master gain control for the selected audio is provided.

Figure 25. Configuration - Audio Controls

The analog audio output format is displayed in the Audio Output panel. Click Stereo to maintain a 2 channel audio output. Select Dual Mono when there is only single channel source audio. Dual mono provides two channel output from a single channel input or mixes left and right channels and sends the mix to both the left and right outputs.

The audio delay control allows the user to achieve audio-to-video synchronization when timing differences occur between the audio and video streams. By default, the audio and video streams are synchronized (Audio Delay: = 0 mS). Audio delay is adjusted between +255 to -255 milliseconds.

Positive delay results in audio lagging video by the set value.

Negative delay results in audio leading video by the set value.

NOTE: The source input must be restarted for an audio delay change to take effect.

Output audio can be toggled on and off using the master Mute button.

A master level control graduated in 1 dB steps from -100 dB (full attenuation) to 0 dB (unity gain) to set or match output levels. Move the slider or enter a value in the field below the slider to adjust volume from 0 (maximum output) to -100 (no output).

Audio mute and level settings are retained through reboot or power cycle events.

SMD 101 • Web-based User Interface

30

Image 36
Contents User Guide Safety Instructions Sicherheitsanweisungen DeutschFCC Class a Notice Registered TrademarksSpecifications Availability Software CommandsConventions Used in this Guide NotificationsContents SMD 101 Contents About this Guide About the SMDExtron SMD Video Output Output Resolution and Edid Support Table Suggested PC Requirements Supported formatsGHz dual-core processor Microsoft Windows XP or higher Mac OS X 10.6 or higherFeatures SMD 101 Introduction Front Panel Features This section provides information onFront panel of the SMD 101 is shown in below Rear Panel Features Rear panel of the SMD 101 is shown in belowPower Supply Connection IR In Wiring SMD 101 Rear Panel Reset Modes 4SMD 101 Power Up Procedure Hardware Setup OverviewAccessing the Web-based User Interface Overview of the Web-based User InterfaceThis section provides information about Overview Player Page All Panels OpenPlayer Player ControlsMute controls Load PlayPlaylist field Browser Source fieldSource format Output formatBrowser Panel Streams Browser Panel, StreamsBrowser Panel Files FilterLoad Loads the selected stream for playingNetwork Shares Network SharesLists Lists Panel Channels tabLists Panel Favorites Lists Panel, Favorites TabLists Panel History Files are not deleted, only the history entryPlaylist Editor Playlist PropertiesPlaylist Clip Properties SMD 101 Web-based User Interface Configuration Video ConfigurationGeneral Video Settings Panel Buffer Settings panel Hdmi Output panelAudio Configuration Configuration Audio ControlsOn Screen Display Status Information PanelAutomation Progress Bar PanelBoot play Screen Saver panelFailover Advanced Configuration Ethernet Settings panelConnection Ethernet Diagnostics panel Network Port Mapping panelSerial RS-232 Settings panel Firmware LoaderConfiguration panel Firmware panelConfiguration Files Exec/Power Mode Power Mode PanelControl Options Panel Password Date and TimeView only access all selections are dimmed PlayerReset Device Device Reset, Reset OptionsPassword Management panel Snmp panelDevice Information Factory Defined Information panelDisplays both device factory and user defined information Status User Defined Information PanelNetwork Statistics panel Device Status panel Local Storage panelBrowser Idle Advanced Player Configuration Loading Content to Local Storage Using SftpSftp Site Manager Dialog PC file uploads to Play Video on Demand Play Video from a Network ShareBrowser Shares Folder SME 100 Stream Discovery Rtsp Multicast Pull StreamingPush Streaming Unicast Port Numbers MulticastConnecting to Streams Without SAP Announcements UDP or RTP ConnectionsHttp Connection to an SME SMD 101 also supports the URI formatsAdd the SME 100 user name and password RTSP//SME100IP/extronHTTP//SME100IP/web/multicast.sdp IR Remote Control LAN port defaults Connection OptionsRS-232 Port RS-232 protocolFront Panel Configuration Port To connect the SMD 101 to a host computerLAN Ethernet Port Ethernet ConnectionVerbose Mode Connection TimeoutsTo Establish a Network Connection to the SMD Password Information Using the Command and Response TablesHost-to-device Communications SMD 101-initiated MessagesError Responses SMD 101 Remote Communication and Control Symbol definitions Onscreen display timeout 0 to =disabled=default Aspect ratio settingsEnclose the URI in quotes even when it Name, preset number, and Media URIPreset1urirtsp//10.13.193.170 IR input 0=disabled, 1=front panelCommand and Response Tables Basic SIS CommandsX2@ CV X2@Command and Response Table for Basic SIS Commands X60@X60# X60$Telnet port Web portSnmp port SSH portMD  Restart networkEX1@ X1@X1# X60EX57 * X1$ EX57EX58 X58X60% Snmp X60%X60 Snmp X51Player SIS Commands File CommandsIpa X3# Ipu X3#Command and Response Table for Player SIS Commands X59# X59X59@ X59$User Presets X59&T TvprR X59TvprT X59 Favorites G X60* X60!HIST X61@Get X60! entries prior Delete X60 Entries priorX52 X54X56# Screen SaverX54@ X52@X55V Vol Outputs VideoParts and Accessories Mounting the SMDTabletop Use Rack Mounting Furniture MountingTable or Wall Mounting UL Rack Mounting GuidelinesSMD 101 Reset Summary FirmwareSIS Optimum Network Share Performance Network Shares DialogConfiguring Windows 7 for Network File Sharing Media Properties dialog box reopens SMD 101 Reference Information SMD 101 Reference Information Click Network and Sharing Center SMD 101 Reference Information Copying Config Files Using Internet Explorer Click OK to start using the program DataViewerStarting the DataViewer program Glossary SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information Extron Warranty
Related manuals
Manual 8 pages 3.73 Kb

SMD 101 specifications

Extron Electronics has long been a prominent name in the realm of audio-visual solutions, and the SMD 101 is a prime example of its innovation in display management technology. The SMD 101 is a compact and versatile AV signal processor and distribution device designed to optimize the performance of modern AV systems.

One of the standout features of the SMD 101 is its ability to handle multiple video resolutions and formats, making it compatible with a wide range of sources and displays. This flexibility ensures that users can connect various components seamlessly, irrespective of their video standards. The SMD 101 supports HDMI signals, including embedded audio, while also offering the capability to manage audio signals separately, providing a comprehensive solution for users who demand high-quality sound alongside their visual content.

Another significant characteristic of the SMD 101 is its powerful scaling technology. With advanced scaling algorithms, it ensures that all video signals are converted to optimal resolutions without sacrificing image quality. This feature is particularly beneficial in environments where content from different sources is displayed simultaneously, maintaining consistent clarity and detail across diverse display types.

Moreover, the SMD 101 integrates Extron's advanced EDID management to streamline the communication between source devices and displays. This technology helps to minimize configuration issues and ensures that the best possible video output is achieved. The device also includes sophisticated audio features, such as audio de-embedding and mixing, enabling users to tailor the audio output to fit their specific requirements.

In terms of connectivity, the SMD 101 provides multiple input and output options, allowing for extensive system integration. The device interfaces easily with various control systems, giving users the ability to automate and manage their AV environments efficiently. It also supports Extron's control system protocols, enhancing its adaptability within existing setups.

Built to last, the SMD 101 features a robust design that ensures reliability in demanding environments. Its compact form factor allows for easy installation in racks, under tables, or in other tight spaces.

Overall, the Extron SMD 101 stands out as a comprehensive solution for AV signal processing and distribution, combining sophisticated features with user-friendly operation. Its cutting-edge technologies make it a powerful tool for any modern AV application, from corporate settings to educational institutions.