Extron electronic SMD 101 manual SME 100 Stream Discovery, Rtsp Multicast Pull Streaming

Page 59

SME 100 Stream Discovery

For SME 100 stream discovery in the SMD 101 stream browser window (see Browser Panel - Streams on page 19), the SME 100 must have both Stream Control and

SAP Control enabled. Figure 49 shows the SME 100 settings. From the SME 100 default web page (see the SME 100 User Guide), select the Encoder Configuration link, then Encoder Settings to open the configuration dialog shown in figure 49 below.

 

 

Streaming Configuration

 

 

 

Stream Control

Stream Method

Destination IP

Destination Port

MTU

TTL

QoS (Differentiated Services)

Enable

Multi TS/RTP

238.13.197.190

60000

1500

10

Normal (CS3)

SAP Control

Session Name

Session Description

Keywords

Author

 

Announce Frequency

Enable

Test Pattern 1

Bars and Tones

test, pattern

 

Extron1

5 sec

Figure 49. SME 100 Encoder Configuration Panel (Partial View)

In both the Stream Control and SAP Control drop-down lists, select Enable. Choose a Destination IP and Destination Port which avoid conflict with other multicast devices on your network, then enter them into the appropriate fields.

With SAP Control enabled, the SME 100 session name (Test Pattern 1) is listed in the SMD 101 stream browser page in the Extron folder. To connect the stream, from the browser, drag and drop the stream anywhere on the Player Controls panel (see Player Controls on page 16).

RTSP Multicast (Pull Streaming)

If an SME 100 is configured for RTSP multicast, the SMD 101 must still connect to it using the SME 100 IP address (for example rtsp://192.168.254.100/extron) rather than the typical multicast IP address (for example rtsp://239.10.193.165).

If the SME 100 is set up for push streaming (Stream Control Enable), the RTSP bitrate is limited to 5 Mbps on startup or restart. Although it can be higher, it is not recommended.

If higher bitrates are required, only a single stream method should be active.

Push Streaming (Unicast Port Numbers)

In systems with more than one SME 100 encoder using any of the unicast push methods (TS/UDP, TS/RTP, ES/RTP) to a single SMD 101 decoder, each SME 100 must use a unique port number (such as 60000 and 61000)

Multicast

For systems where streams from one or more SME 100s are received and decoded by multiple SMD 101s, multicast addressing is strongly recommended. All network switches must be suitably rated and correctly configured for IGMP snooping and multicast filtering with an active IGMP querier (possibly the network switch) available on the local subnet for optimum performance.

SMD 101 • Advanced Player Configuration

53

Page 58 Page 60
Image 59
Page 58 Page 60
Contents User Guide Sicherheitsanweisungen Deutsch Safety InstructionsRegistered Trademarks FCC Class a NoticeNotifications Specifications AvailabilitySoftware Commands Conventions Used in this GuideContents SMD 101 Contents About the SMD About this GuideExtron SMD Video Output Output Resolution and Edid Support Table Microsoft Windows XP or higher Mac OS X 10.6 or higher Suggested PC RequirementsSupported formats GHz dual-core processorFeatures SMD 101 Introduction Front panel of the SMD 101 is shown in below Front Panel FeaturesThis section provides information on Rear panel of the SMD 101 is shown in below Rear Panel FeaturesPower Supply Connection IR In Wiring Modes 4 SMD 101 Rear Panel ResetHardware Setup Overview SMD 101 Power Up ProcedureThis section provides information about Accessing the Web-based User InterfaceOverview of the Web-based User Interface Player Page All Panels Open OverviewPlayer Controls PlayerPlaylist field Mute controlsLoad Play Output format BrowserSource field Source formatBrowser Panel, Streams Browser Panel StreamsLoads the selected stream for playing Browser Panel FilesFilter LoadNetwork Shares Network SharesLists Panel Channels tab ListsLists Panel, Favorites Tab Lists Panel FavoritesFiles are not deleted, only the history entry Lists Panel HistoryPlaylist Properties Playlist EditorPlaylist Clip Properties SMD 101 Web-based User Interface General Video Settings Panel ConfigurationVideo Configuration Hdmi Output panel Buffer Settings panelConfiguration Audio Controls Audio ConfigurationStatus Information Panel On Screen DisplayProgress Bar Panel AutomationFailover Boot playScreen Saver panel Connection Advanced ConfigurationEthernet Settings panel Network Port Mapping panel Ethernet Diagnostics panelFirmware Loader Serial RS-232 Settings panelFirmware panel Configuration panelConfiguration Files Control Options Panel Exec/Power ModePower Mode Panel Date and Time PasswordPlayer View only access all selections are dimmedDevice Reset, Reset Options Reset DeviceSnmp panel Password Management panelDisplays both device factory and user defined information Device InformationFactory Defined Information panel Network Statistics panel StatusUser Defined Information Panel Local Storage panel Device Status panelBrowser Idle Loading Content to Local Storage Using Sftp Advanced Player ConfigurationSftp Site Manager Dialog PC file uploads to Play Video from a Network Share Play Video on DemandBrowser Shares Folder Multicast SME 100 Stream DiscoveryRtsp Multicast Pull Streaming Push Streaming Unicast Port NumbersSMD 101 also supports the URI formats Connecting to Streams Without SAP AnnouncementsUDP or RTP Connections Http Connection to an SMEHTTP//SME100IP/web/multicast.sdp Add the SME 100 user name and passwordRTSP//SME100IP/extron IR Remote Control RS-232 protocol LAN port defaultsConnection Options RS-232 PortTo connect the SMD 101 to a host computer Front Panel Configuration PortEthernet Connection LAN Ethernet PortTo Establish a Network Connection to the SMD Verbose ModeConnection Timeouts SMD 101-initiated Messages Password InformationUsing the Command and Response Tables Host-to-device CommunicationsError Responses SMD 101 Remote Communication and Control Symbol definitions Aspect ratio settings Onscreen display timeout 0 to=disabled =defaultIR input 0=disabled, 1=front panel Enclose the URI in quotes even when itName, preset number, and Media URI Preset1urirtsp//10.13.193.170X2@ Command and Response TablesBasic SIS Commands X2@ CVX60$ Command and Response Table for Basic SIS CommandsX60@ X60#SSH port Telnet portWeb port Snmp portRestart network MD X60 EX1@X1@ X1#X58 EX57 * X1$EX57 EX58X51 X60% SnmpX60% X60 SnmpIpu X3# Player SIS CommandsFile Commands Ipa X3#Command and Response Table for Player SIS Commands X59$ X59#X59 X59@Favorites User PresetsX59&T TvprR X59 TvprT X59Delete X60 Entries prior  G X60* X60!HISTX61@ Get X60! entries priorScreen Saver X52X54 X56#Outputs Video X54@X52@ X55V VolTabletop Use Parts and AccessoriesMounting the SMD UL Rack Mounting Guidelines Rack MountingFurniture Mounting Table or Wall MountingFirmware SMD 101 Reset SummarySIS Network Shares Dialog Optimum Network Share PerformanceConfiguring Windows 7 for Network File Sharing Media Properties dialog box reopens SMD 101 Reference Information SMD 101 Reference Information Click Network and Sharing Center SMD 101 Reference Information Copying Config Files Using Internet Explorer Starting the DataViewer program Click OK to start using the programDataViewer Glossary SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information Extron Warranty
Related manuals
Manual 8 pages 3.73 Kb

SMD 101 specifications

Extron Electronics has long been a prominent name in the realm of audio-visual solutions, and the SMD 101 is a prime example of its innovation in display management technology. The SMD 101 is a compact and versatile AV signal processor and distribution device designed to optimize the performance of modern AV systems.

One of the standout features of the SMD 101 is its ability to handle multiple video resolutions and formats, making it compatible with a wide range of sources and displays. This flexibility ensures that users can connect various components seamlessly, irrespective of their video standards. The SMD 101 supports HDMI signals, including embedded audio, while also offering the capability to manage audio signals separately, providing a comprehensive solution for users who demand high-quality sound alongside their visual content.

Another significant characteristic of the SMD 101 is its powerful scaling technology. With advanced scaling algorithms, it ensures that all video signals are converted to optimal resolutions without sacrificing image quality. This feature is particularly beneficial in environments where content from different sources is displayed simultaneously, maintaining consistent clarity and detail across diverse display types.

Moreover, the SMD 101 integrates Extron's advanced EDID management to streamline the communication between source devices and displays. This technology helps to minimize configuration issues and ensures that the best possible video output is achieved. The device also includes sophisticated audio features, such as audio de-embedding and mixing, enabling users to tailor the audio output to fit their specific requirements.

In terms of connectivity, the SMD 101 provides multiple input and output options, allowing for extensive system integration. The device interfaces easily with various control systems, giving users the ability to automate and manage their AV environments efficiently. It also supports Extron's control system protocols, enhancing its adaptability within existing setups.

Built to last, the SMD 101 features a robust design that ensures reliability in demanding environments. Its compact form factor allows for easy installation in racks, under tables, or in other tight spaces.

Overall, the Extron SMD 101 stands out as a comprehensive solution for AV signal processing and distribution, combining sophisticated features with user-friendly operation. Its cutting-edge technologies make it a powerful tool for any modern AV application, from corporate settings to educational institutions.
Top Page Image Contents