Extron electronic manual SMD 101 Power Up Procedure, Hardware Setup Overview

Page 19

SMD 101 Power Up Procedure

NOTE: Before powering on the SMD 101, ensure that all necessary devices are connected properly. Devices do not need to be powered.

Connect the external power supply to a 100 to 240 VAC supply (see Rear Panel Features on page 9). The DC power LED lights and the SMD 101 undergoes a self testing sequence. When connected to a network, the front panel network LED indicator lights green when the SMD 101 is ready to decode.

Hardware Setup Overview

NOTE: If it is difficult to access the device after installation, configure the network settings of the SMD 101 prior to starting (see Accessing the Web-based User Interface on page 14 , and Connection on page 34).

1.If the SMD 101 has been on for configuration, turn it off and disconnect the SMD 101 and all connected devices.

2.Mount the SMD 101 (see Mounting the SMD 101 on page 81).

3.Connect one end of an RJ-45 cable to the rear panel LAN connector on the SMD 101 (see Rear Panel Features on page 9). Connect the other end of the RJ‑45 cable

to the local network.

4.Connect a compatible output device to the rear panel (see Rear Panel Features on page 9) and power it on.

5.Connect a control device to the SMD 101 by one of the following connections:

a.The front panel config port (see Front Panel Configuration Port on page 58).

b.The rear panel RS-232 port (see RS-232 Port on page 57).

c.The Ethernet connection. Configure the network settings of the control PC so it is compatible with the network the SMD 101 is connected to (see LAN (Ethernet) Port on page 59).

6.Connect the external power supply output connector to the SMD 101 (see Rear Panel Features on page 9), then connect the power supply to a 100 to 240 VAC, 50 Hz

or 60 Hz power source. The SMD 101 powers up automatically and undergoes a self testing sequence (see the SMD 101 Power Up Procedure, above).

7.From the control PC, access the user interface of the SMD 101 (see Accessing the Web-based User Interface on page 14).

8.Select a stream to decode (see Player Page on page 16).

9.If necessary, set the decoder output for the connected display (see Video Output on page 3 and Video Configuration on page 28).

10.Press Play on the software interface (see Player Page on page 16) or on the optional remote control (see IR Remote Control on page 56) to begin decoding the selected stream.

SMD 101 • Panels and Cabling

13

Page 18 Page 20
Image 19
Page 18 Page 20
Contents User Guide Sicherheitsanweisungen Deutsch Safety InstructionsRegistered Trademarks FCC Class a NoticeNotifications Specifications AvailabilitySoftware Commands Conventions Used in this GuideContents SMD 101 Contents About the SMD About this GuideExtron SMD Video Output Output Resolution and Edid Support Table Microsoft Windows XP or higher Mac OS X 10.6 or higher Suggested PC RequirementsSupported formats GHz dual-core processorFeatures SMD 101 Introduction This section provides information on Front Panel FeaturesFront panel of the SMD 101 is shown in below Rear panel of the SMD 101 is shown in below Rear Panel FeaturesPower Supply Connection IR In Wiring Modes 4 SMD 101 Rear Panel ResetHardware Setup Overview SMD 101 Power Up ProcedureOverview of the Web-based User Interface Accessing the Web-based User InterfaceThis section provides information about Player Page All Panels Open OverviewPlayer Controls PlayerLoad Play Mute controlsPlaylist field Output format BrowserSource field Source formatBrowser Panel, Streams Browser Panel StreamsLoads the selected stream for playing Browser Panel FilesFilter LoadNetwork Shares Network SharesLists Panel Channels tab ListsLists Panel, Favorites Tab Lists Panel FavoritesFiles are not deleted, only the history entry Lists Panel HistoryPlaylist Properties Playlist EditorPlaylist Clip Properties SMD 101 Web-based User Interface Video Configuration ConfigurationGeneral Video Settings Panel Hdmi Output panel Buffer Settings panelConfiguration Audio Controls Audio ConfigurationStatus Information Panel On Screen DisplayProgress Bar Panel AutomationScreen Saver panel Boot playFailover Ethernet Settings panel Advanced ConfigurationConnection Network Port Mapping panel Ethernet Diagnostics panelFirmware Loader Serial RS-232 Settings panelFirmware panel Configuration panelConfiguration Files Power Mode Panel Exec/Power ModeControl Options Panel Date and Time PasswordPlayer View only access all selections are dimmedDevice Reset, Reset Options Reset DeviceSnmp panel Password Management panelFactory Defined Information panel Device InformationDisplays both device factory and user defined information User Defined Information Panel StatusNetwork Statistics panel Local Storage panel Device Status panelBrowser Idle Loading Content to Local Storage Using Sftp Advanced Player ConfigurationSftp Site Manager Dialog PC file uploads to Play Video from a Network Share Play Video on DemandBrowser Shares Folder Multicast SME 100 Stream DiscoveryRtsp Multicast Pull Streaming Push Streaming Unicast Port NumbersSMD 101 also supports the URI formats Connecting to Streams Without SAP AnnouncementsUDP or RTP Connections Http Connection to an SMERTSP//SME100IP/extron Add the SME 100 user name and passwordHTTP//SME100IP/web/multicast.sdp IR Remote Control RS-232 protocol LAN port defaultsConnection Options RS-232 PortTo connect the SMD 101 to a host computer Front Panel Configuration PortEthernet Connection LAN Ethernet PortConnection Timeouts Verbose ModeTo Establish a Network Connection to the SMD SMD 101-initiated Messages Password InformationUsing the Command and Response Tables Host-to-device CommunicationsError Responses SMD 101 Remote Communication and Control Symbol definitions Aspect ratio settings Onscreen display timeout 0 to=disabled =defaultIR input 0=disabled, 1=front panel Enclose the URI in quotes even when itName, preset number, and Media URI Preset1urirtsp//10.13.193.170X2@ Command and Response TablesBasic SIS Commands X2@ CVX60$ Command and Response Table for Basic SIS CommandsX60@ X60#SSH port Telnet portWeb port Snmp portRestart network MD X60 EX1@X1@ X1#X58 EX57 * X1$EX57 EX58X51 X60% SnmpX60% X60 SnmpIpu X3# Player SIS CommandsFile Commands Ipa X3#Command and Response Table for Player SIS Commands X59$ X59#X59 X59@Favorites User PresetsX59&T TvprR X59 TvprT X59Delete X60 Entries prior  G X60* X60!HISTX61@ Get X60! entries priorScreen Saver X52X54 X56#Outputs Video X54@X52@ X55V VolMounting the SMD Parts and AccessoriesTabletop Use UL Rack Mounting Guidelines Rack MountingFurniture Mounting Table or Wall MountingFirmware SMD 101 Reset SummarySIS Network Shares Dialog Optimum Network Share PerformanceConfiguring Windows 7 for Network File Sharing Media Properties dialog box reopens SMD 101 Reference Information SMD 101 Reference Information Click Network and Sharing Center SMD 101 Reference Information Copying Config Files Using Internet Explorer DataViewer Click OK to start using the programStarting the DataViewer program Glossary SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information SMD 101 Reference Information Extron Warranty
Related manuals
Manual 8 pages 3.73 Kb

SMD 101 specifications

Extron Electronics has long been a prominent name in the realm of audio-visual solutions, and the SMD 101 is a prime example of its innovation in display management technology. The SMD 101 is a compact and versatile AV signal processor and distribution device designed to optimize the performance of modern AV systems.

One of the standout features of the SMD 101 is its ability to handle multiple video resolutions and formats, making it compatible with a wide range of sources and displays. This flexibility ensures that users can connect various components seamlessly, irrespective of their video standards. The SMD 101 supports HDMI signals, including embedded audio, while also offering the capability to manage audio signals separately, providing a comprehensive solution for users who demand high-quality sound alongside their visual content.

Another significant characteristic of the SMD 101 is its powerful scaling technology. With advanced scaling algorithms, it ensures that all video signals are converted to optimal resolutions without sacrificing image quality. This feature is particularly beneficial in environments where content from different sources is displayed simultaneously, maintaining consistent clarity and detail across diverse display types.

Moreover, the SMD 101 integrates Extron's advanced EDID management to streamline the communication between source devices and displays. This technology helps to minimize configuration issues and ensures that the best possible video output is achieved. The device also includes sophisticated audio features, such as audio de-embedding and mixing, enabling users to tailor the audio output to fit their specific requirements.

In terms of connectivity, the SMD 101 provides multiple input and output options, allowing for extensive system integration. The device interfaces easily with various control systems, giving users the ability to automate and manage their AV environments efficiently. It also supports Extron's control system protocols, enhancing its adaptability within existing setups.

Built to last, the SMD 101 features a robust design that ensures reliability in demanding environments. Its compact form factor allows for easy installation in racks, under tables, or in other tight spaces.

Overall, the Extron SMD 101 stands out as a comprehensive solution for AV signal processing and distribution, combining sophisticated features with user-friendly operation. Its cutting-edge technologies make it a powerful tool for any modern AV application, from corporate settings to educational institutions.
Top Page Image Contents