Extron electronic SWP123 manual CTL120-3 IR Remote Control, Switching input devices

CTL120-3 IR Remote Control

The CTL120-3 IR remote control sends infrared commands to the built-in infrared receiver in the SWP123 switcher to control various functions. The illustration below shows the location and function of each button on the remote control unit that can be used to control the SWP123 Presentation Switcher.

Initially, press and release the SWP SWITCHER button on the remote control unit to change it to SWP switcher mode.

SWP SWITCHER Button

Press and release this button first to set the CTL120-3 to control the SWP123 Presentation Switcher.

SWP	Important!
	Press this button first!
SWITCHER

Numeric Buttons (1, 2, 3, 4, and 0 only)

To select an input device:

First press and release1-4 to select the A/V group:

1 = VGA

2 = S-Video

3 = Video

4 = Audio

Next press and release 1-4 to select the input device:

1 = Input 1

2 = Input 2

3 = Input 3

4 = Input 4

0 = Blank

	PROJECTOR
	S
VIDEO	SWP
SCALER	SWITCHER

VGAS-VIDEOVIDEO

1	2	3
AUDIO
4	5	6
7	8	9
	BLANK	ENTER
	0
PIP		ENT

FREEZE

Enter Button

Press and release to execute switch after selecting

A/V group and input.

MIC Button Press and release (+) to increase, or (-) to decrease MIC volume.

TALK OVER Button

Press and release to toggle

Mic Talk Over on or off.

MENU MIC VOL ENTER
+	+
–	–	Volume Buttons
		Press and release (+) to increase, or (-) to
		decrease Master A/V volume.
TALK OVER	MUTE	Mute Button
		Mutes Master A/V audio.

Figure 5-3 — CTL120-3 infrared remote control

Switching input devices

To switch to a new input group and input device using the CTL120-3 remote control:

1.Press and release the SWP SWITCHER button.

2.Press and release the numeric button (1, 2, 3, or 4) on the remote that corresponds to the desired input group (VGA, S-video, Video, or Audio, respectively).

3.Press and release the numeric button (1, 2, 3, or 4) on the remote control unit that corresponds to the desired input device within the selected group that you want to connect to the output.

SWP123 Presentation Switcher • Remote Control 5-11