Extron electronic SWP123 manual Specifications, cont’d, Master audio output

Page 44

Specifications, cont’d

Microphone volume range	-55 dB to +9 dB
Microphone DC power	24 V

Master audio output

Gain	-55 dB to +9 dB
Number/signal type	1 stereo, balanced/unbalanced
Connectors	(1) 3.8 mm captive screw connector, 5 pole
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.01 dB channel to channel
Maximum level (Hi-Z)	>+24 dBu, balanced at 1%THD+N
Maximum level (600 ohm)	>+18 dBm, balanced at 1%THD+N

Control/remote — switcher

Serial control port	RS-232, RS-422, or RS-485 on a 3.8 mm, 5-pole captive screw connector
Baud rate and protocol	1200/2400/4800/9600/19200/38400, 8-bit, 1 stop bit, no parity
Serial control pin configurations	1 = GND, 2 = TX-, 3 = TX+, 4 = RX-, 5 = RX+
IR controller module	CTL120-3 (optional)
Program control	Inline control software

General

Power	100 VAC to 240 VAC, 50/60 Hz, 15 watts, internal, autoswitchable
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
	Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount	Yes
Enclosure type	Metal
Enclosure dimensions	3.5" H x 19.0" W x 5.5" D (2U high, full rack wide)
	8.9 cm H x 48.3 cm W x 14.0 cm D
	(Depth excludes connectors and buttons. Width is 17.25"/43.8 cm excluding
	rack ears.)
Product weight	5.5 lbs (2.5 kg)
Shipping weight	7 lbs (4 kg)
DIM weight
USA/Canada	8 lbs (4 kg)
International	9 lbs (5 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Listings	ETL (UL1950)
Compliances	FCC Class A
MTBF	30,000 hours
Warranty	3 years parts and labor

All nominal levels are at ±10%.

Specifications are subject to change without notice.

A-4 SWP123 Presentation Switcher • Specifications

Image 44

Contents Presentation Switcher SWP123Precautions Safety Instructions EnglishConsignes de Sécurité Français Sicherheitsanleitungen DeutschRack mounting the SWP123 SWP123 Presentation Switcher Quick Start QS-1Quick Start SWP123 QS-2 SWP123 Presentation Switcher Quick Start Quick Start SWP123, cont’dTable of Contents Table of Contents, cont’d One IntroductionAbout the SWP123 Presentation Switcher SWP123 Switcher FeaturesSWP123 Presentation Switcher Introduction IntroductionSWP123 Presentation Switcher Introduction Introduction, cont’d Installation TwoInstallation Mounting the SwitcherSWP123 Presentation Switcher Installation Tabletop useRear Panel Connectors Rear panel of the SWP123Installation, cont’d Connecting the SWP123 SwitcherConnecting the unbalanced audio input Audio input and outputConnecting the unbalanced audio output Connecting the balanced audio outputOperation MVP 104GX InstallationThree Front Panel Features SWP123 Presentation Switcher OperationOperation Video/Audio Select groupsMiscellaneous controls and features Front Panel OperationSelecting A/V inputs to output Blanking the output from a groupMicrophone controls Operation, cont’dMaster Audio functions Decoder Loop Function Wiring the decoder loop+24V Phantom Power switch This page was intentionally left blank MVP 104 Operation FourWindows-Based Control Program Installing the Windows-based ICS100 Control Software Using the SoftwareSpecifying your switcher model Windows-Based Control Program, cont’dUsing the Control Panel Defining input icons and labelsAdjusting the Master Audio or Microphone audio level Enabling audio-follow-video switchingSelecting a new input Blanking the output of a groupEnabling/disabling front panel control Setting audio gain input to Master Audio outputUsing Terminal Comm ICS100 Control Program Help Resetting the unitSWP123 Presentation Switcher Windows-Based Control Program MVP 104 Windows Control Program Remote ControlFive DIP switch settings SWP123 Presentation Switcher Remote ControlAddressing commands Host-to-Switcher CommunicationsUsing the command tables Remote Control, cont’d Setup commandsSwitching commands Volume commands Mute/un-muteAdjust volume level-right Set volume level-rightRamp volume level Stop volume rampRemote Control from a Network Enabling remote control of the switcher over a networkConfiguring the server local PC Configuring the client remote PCStopping communication Adjusting response time10 SWP123 Presentation Switcher Remote Control CTL120-3 IR Remote Control Switching input devicesResetting the component code 12SWP123 Presentation Switcher Remote ControlMVP 104 Programmer’s Guide SpecificationsAAppendix Specifications SWP123 Presentation Switcher SpecificationsSWP123 Presentation Switcher Specifications Audio masterSpecifications, cont’d Master audio outputBAppendix Reference InformationUpdating the Firmware SWP123 Presentation Switcher Reference InformationReference Information SWP123 switcher part numbers Optional accessoriesPart Numbers CablesExtron Part Part number BNC-5 Mini HR Cable Reference Information, cont’dPre-cut cables FCC Class a Notice Extron’s Warranty Extron Electronics, USA