English
)Power LED in S1 state
Blinking | In standby mode(S1), power LED will blink. (Default value) |
Dual/Off | In standby mode(S1): |
| a. If use single color LED, power LED will turn off. |
| b. If use dual color LED, power LED will turn to another color. |
)Soft-off by PWRBTN
Press power button then Power off instantly. (Default value) | |
Delay 4 Sec. | Press power button 4 sec to Power off. Enter suspend if button is pressed |
| less than 4 sec. |
)AC Back Function
Memory | System power on depends on the status before AC lost. |
Always in Off state when AC back. (Default value) | |
Always power on the system when AC back. |
)KeyboardPowerOn
This feature allows you to set the method for
The option "Password" allows you to set up to 8 alphanumeric characters to
Password | Enter from 1 to 8 characters to set the Keyboard Power On Password. |
Disabled | Disabled this function. (Default value) |
Keyboard 98 | If your keyboard have "POWER Key" button, you can press the key to |
| power on your system. |
)Mouse Power On
Disabled | Can't Power on system by Mouse Event. (Default value) |
Enabled | Can Power on system by Mouse Event. |
- 44 - |