Gigabyte GA-7VT600 Task menu for Dual Bios utility, Task menu for Q-Flashutility, Action bar

English

Task menu for Dual BIOS utility:

Contains the names of eight tasks and two item showing information about the BIOS ROM type. Blocking a task and pressing Enter key on your keyboard to enable execution of the task.

Task menu for Q-Flash™utility:

Contains the names of four tasks. Blocking a task and pressing Enter key on your keyboard to enable execution of the task.

Action bar:

Contains the names of four actions needed to operate the Q-Flash™/Dual BIOS utility. Pressing the buttons mentioned on your keyboards to perform these actions.

Using the Q-Flash™utility:

This section tells you how to update BIOS using the Q-Flash™utility. As described in the “Before you begin” section above, you must prepare a floppy disk having the BIOS file for your motherboard and insert it to your computer. If you have already put the floppy disk into your system and have entered

the Q-Flash™utility, please follow the steps below to flash BIOS.

Steps:

1.Press arrow buttons on your keyboard to move the light bar to "Load Main BIOS from Floppy" item in the Q-Flash™menu and press Enter button.

If you want to save the current BIOS for backup purpose, you can begin Step 1 with "Save Main BIOS to Floppy" item.

	Dual BIOS Utility
Boot From		Main Bios
Main ROM Type/Size		SST 49LF003A	256K
Backup ROM Type/Size		SST 49LF003A	256K
Wide Range Protection		Disable
	Boot From	Main Bios
	Auto Recovery	Enable
	Halt On Error	Disable
	Copy Main ROM Data to Backup
	Load Default Settings
	Save Settings to CMOS
	Q-Flash Utility
	Load Main BIOS from Floppy
	Load Backup BIOS from Floppy
	Save Main BIOS to Floppy
	Save Backup BIOS to Floppy
Enter : Run	:Move	ESC:Reset	F10:Power Off

GA-7VT600(-L) Motherboard - 62 -