English
)PCI/AGPFrequency(MHz)
The values depend on CPU Host Frequency(Mhz) .
)DRAMClock(MHz)
Please set DRAM Clock according to your requirement. (Default value: Auto)
If you use DDR266 DRAM module, please set "DRAM Clock(MHz)" to
Incorrect using it may cause your system broken. For power
)CPU OverVoltage Control
Increase CPU voltage may get stable for Over_Clock. But it may damage to CPU when enable this feature.
AutoSupply voltage as CPU reguired. (Default value)
+5% / +7.5% / +10% Increase voltage range as user selected.
)AGPOverVoltage Control
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable this feature.
AutoSupply voltage as AGP Card reguired. (Default value)
+0.1V ~ +0.3V Set AGP voltage from 1.6V~1.8V.
)DIMMOverVoltageControl
Increase DRAM voltage may get stable for Over_Clock. But it may damage to DRAM module when enable this feature.
AutoSupply voltage as DRAM module reguired. (Default value)
+0.1V ~ +0.3V Set DIMM voltage from 2.6V~2.8V.
- 50 - |