Gigabyte GA-7VT600 manual Basic 6 Channel Analog Audio Output Mode

English

Basic 6 Channel Analog Audio Output Mode

Use the back audio panel to connect the audio output without any additional module.

STEP 1 :

Connect the front channels to "Line Out", the rear

channels to "Line In", and the Center/SubwooferLine In channels to "MIC In".

MIC In Line Out

STEP 2 :

After installation of the audio driver, you'll find an

icon on the taskbar's status area. Click the

audio icon "Sound Effect" from the windows tray at the bottom of the screen.

STEP 3 :

Select "Speaker Configuration", and choose the "6 channels for 5.1 speakers out put".

Disable "Only SURROUND-KIT" and pess "OK".

GA-7VT600(-L) Motherboard - 76 -