English
Onboard H/W 1394
Enabled | Enable onboard IEEE 1394 function.(Default value) |
Disabled | Disable this function. |
Onboard H/W LAN1
Enabled | Enable Onboard H/W LAN1 function. (Default value) |
Disabled | Disable this function. |
Onboard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled | Enable this function. |
Disabled | Disable this function. (Default value) |
Onboard Serial Port 1
Auto | BIOS will automatically setup the port 1 address. |
3F8/IRQ4 | Enable onboard Serial port 1 and address is 3F8. (Default value) |
2F8/IRQ3 | Enable onboard Serial port 1 and address is 2F8. |
3E8/IRQ4 | Enable onboard Serial port 1 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 1 and address is 2E8. |
Disabled | Disable onboard Serial port 1. |
Onboard Serial Port 2
Auto | BIOS will automatically setup the port 2 address. |
3F8/IRQ4 | Enable onboard Serial port 2 and address is 3F8. |
2F8/IRQ3 | Enable onboard Serial port 2 and address is 2F8. (Default value) |
3E8/IRQ4 | Enable onboard Serial port 2 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 2 and address is 2E8. |
Disabled | Disable onboard Serial port 2. |
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal | Set onboard I/O chip UART to Normal Mode. (Default Value) |
ASKIR | Set onboard I/O chip UART to ASKIR Mode. |
IrDA | Set onboard I/O chip UART to IrDA Mode. |
UR2 Duplex Mode
This feature allows you to seclect IR mode.
This function will available when "UART Mode Select" doesn't set at Normal.
Half | IR Function Duplex Half. (Default value) |
Full | IR Function Duplex Full. |
Onboard Parallel port
Disabled | Disable onboard LPT port. |
378/IRQ7 | Enable onboard LPT port and address is 378/IRQ7. (Default value) |
278/IRQ5 | Enable onboard LPT port and address is 278/IRQ5. |
3BC/IRQ7 | Enable onboard LPT port and address is 3BC/IRQ7. |
- 38 - |