Gigabyte GA-8IP775 Series user manual Installation of Expansion Cards

English

1-5 Installation of Expansion Cards

You can install your expansion card by following the steps outlined below:

1.Read the related expansion card's instruction document before install the expansion card into the computer.

2.Remove your computer's chassis cover, screws and slot bracket from the computer.

3.Press the expansion card firmly into expansion slot in motherboard.

4.Be sure the metal contacts on the card are indeed seated in the slot.

5.Replace the screw to secure the slot bracket of the expansion card.

6.Replace your computer's chassis cover.

7.Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.

8.Install related driver from the operating system .

Installing a AGP expansion card:

Please carefully pull out the small white-drawable bar at the end of the AGP slot when you try to install/

AGP CardUninstall the VGA card. Please align the VGA card to the onboard AGP slot and press firmly down on the slot .Make sure your VGA card is locked by the small white -drawable bar.

GA-8IP775 Series Motherboard - 16 -