Gigabyte GA-8IP775 Series Memory Frequency For, Memory Frequency Mhz, AGP/PCI/SRC Frequency Mhz

English

Memory Frequency For

Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue. for FSB(Front Side Bus) frequency=533MHz,

2.0	Memory Frequency = Host clock X 2.0.
2.5	Memory Frequency = Host clock X 2.5.
Auto	Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=800MHz,
2.0	Memory Frequency = Host clock X 2.0.
Auto	Set Memory frequency by DRAM SPD data. (Default value)

Memory Frequency (Mhz)

The values depend on "CPU Host Frequency(Mhz)" item.

AGP/PCI/SRC Frequency (Mhz)

The values depend on Fixed AGP/PCI/SRC Fixed.

DIMM OverVoltage Control

Please note that by overclocking your system through the increase of the DIMM voltage, damage to the memory may occur.

Normal	Set DIMM OverVoltage Control to Normal. (Default value)
+0.1V	Set DIMM OverVoltage Control to +0.1V.
+0.2V	Set DIMM OverVoltage Control to +0.2V.

Incorrect using it may cause your system broken. For power End-User use only!

AGP OverVoltage Control

Normal	Set AGP OverVoltage Control to Normal. (Default value)
+0.1V	Set AGP OverVoltage Control to +0.1V.
+0.2V	Set AGP OverVoltage Control to +0.2V.
+0.3V	Set AGP OverVoltage Control to +0.3V.

Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable this feature.

CPU Voltage Control

Supports adjustable CPU Vcore from 0.8375V to 1.6000V. (Default value: Normal) Warning: CPU may be damaged or reduce CPU life-cycle when CPU is over-voltage.

Normal CPU Vcore

Display your CPU Vcore Voltage.

GA-8IP775 Series Motherboard - 46 -