ATTO Technology 2100, 3100, 3200, 2200, 1100 manual Firmware updater panel

Page 18

4.6 Firmware updater panel

This panel is used to flash the updated FibreBridge firmware.

Firmware for FibreBridge products is distributed in a .JAR file, a compressed file containing the firmware image file (*.IMA) and supporting readme documents. It is not necessary to decompress the JAR file before flashing.

If necessary, BridgeTools will flash the FibreBridge with

.IMA files.

1Download the latest firmware, a .JAR file, from the ATTO Technology, Inc. web site at www.attotech.com. Store it in a convenient location, possibly in the BridgeTools directory.

2Click on the BROWSE button to locate the

.JAR file.

3Highlight the file and click the SELECT button. The file selected will be displayed in the ‘Select firmware to flash’ window.

4Click on the VIEW DOCUMENTATION button to read about this version of firmware, new features and any recommendations from ATTO Technology, Inc.

5Click on the FLASH button to erase the current version of firmware and install the new version. BridgeTools will indicate when the process is completed.

WARNING Do not cycle power on the FibreBridge while the unit is being flashed.

6The new firmware will not execute until power is cycled on the FibreBridge or a Restart firmware command is issued from the Save/Restore panel. Once one FibreBridge has been flashed, BridgeTools will be able to recall the firmware file. The firmware will be found in the ‘Select Firmware to Flash’ pull-down window.

Some options will be “grayed out” on the panel: they are not available because of the type of access mode or FibreBridge model or they have no effect based on other

selections. The chart below shows options available based on model and access method.

Access method

2200/3200

2200/3200

2200/3200

4500

4500

4500

Options

in-band

Ethernet

serial port

in-band

Ethernet

serial port

 

 

 

 

 

 

 

Firmware updater utility

 

 

 

 

 

 

 

 

 

15 ATTO Technology BridgeTools Installation and Operation Manual

Image 18
Contents Installation & Operations Manual Page Contents Atto FibreBridge supports diverse SAN needs Atto FibreBridgeTM feature availability matrix FibreBridge family1180E/D 1190E 2200R/D 2300E/R/D 3200R 3300R 4500C/R/D BridgeTools aids FibreBridge management Glossary Term DefinitionInstalling the BridgeTools program Installation step by stepRequirements Installing the program Sun SolarisBridgeTools graphical interface is ready Graphical InterfaceStarting up Ethernet connection FibreBridge connection pagesWelcome Serial port connectionConnection pages General panel Scsi Port configuration panel Ethernet port configuration panel Flow Control default = None Serial port configuration panelBaud Rate default = Stop Bits default =Firmware updater panel Fibre Channel port configuration panel Open Full Duplex default = Enabled Fibre Channel Connect Mode default = Arbitrated Loop FLPortFibre Channel Frame Length default = Physical Device Addressing Method default = Llll TttbFC port configuration Mapping panel Trouble shooting MappingEvent Subsystem default = all active Event Level default = all activeEvent Logging default = active Events panelSave/Restore panel Destop/Rackmount Appendix a Available products and accessoriesEmbedded Atto FC Rack System build to orderField Replacement Units FRU Appendix B How to contact Atto Technology, Inc Atto Technology, Inc