ATTO Technology 1550D operation manual Optional changes, Modify passwords, Preliminary steps

Page 18

3.3 Optional changes

Default values, even if you have not used the ExpressWizard, are appropriate for most configurations, but may be modified.

Preliminary steps

1If you are not already in the ExpressNAV interface, type the IP address of your iPBridge in a standard browser as found in Using ExpressNAV on page 23, click Enter Here,

Modify passwords

1Follow the Preliminary steps

2Click Bridge.

The Bridge Configuration page is displayed.

The Administrator user name that you are currently logged in with and the current read only user name, if present, are displayed in their text boxes.

type in your user name and password, and click

OK.

2The Status page appears.

View the default settings by clicking on each element in the left hand menu, then use the individual pages listed on the side menu to make changes or use other features.

3Enter the Administrator (Admin) password where indicated.

4Enter appropriate information into the New

Admin Password, Confirm New Admin Password or New Read Only Password and Confirm New Read Only Password text boxes.

5Click Submit.

6Go to the Restart page and restart the iPBridge.

Set up a VLAN: Virtual Local Area Network

A Virtual LAN (VLAN) is a group of devices on the same physical LAN which can communicate with each other as if they were all on different physical LANs. This creates a network that is independent of physical location, allows grouping of users into logical workgroups, increases efficient use of resources, and adds security options by allowing some users into the LAN and keeping other users out.

You may create up to eight Virtual LAN IDs for each Ethernet data port. Each VLAN ID is

assigned a VLAN name of up to 64 characters. If no VLAN Id exists for a data port, VLAN is disabled for that port.

1Follow the Preliminary steps

2Click on the Ethernet menu item.

3The Ethernet Port Configuration page appears. Add a VLAN ID number and name in the appropriate boxes.

4Press Submit.

5Go to the Restart page and restart the iPBridge.

After rebooting, Virtual LAN takes effect.

13

ATTO Technology Inc. iPBridge Installation and Operation Manual

Page 17 Page 19
Image 18
Page 17 Page 19
Contents IPBridge 1550D Atto Technology, Inc Contents Interface options Appendix C Safety standards and compliances XivUpdating firmware Appendix a CablingPage Features Atto iPBridge provides storage optionsExhibit 1.0-1 Possible storage solutions using the iPBridge Physical components Exhibit 1.1-1 iPBridge 1550D back panel Installing the iPBridge InstallationUnpacking the packing box verifying contents Installing Windows driversSelect Internet Options Installing MS iSCSI Initiator for WindowsBeginning initial configuration Uncheck the Require server verification check boxConfigure the iPBridge Preliminary stepsExpressWizard Page Target management Default target nodeAutomatically configure a single target Target namesMultiple target nodes Automatically configure multiple targetsManually configure multiple target nodes Click on the Map each device to its own target buttonExhibit 3.1-1 Target node configurations Ethernet ISCSI configurationChap commands ISCSIOptional changes Modify passwordsSet up a Vlan Virtual Local Area Network Preliminary stepsISCSI performance configuration tool Windows only Enhance performanceRemote system monitoring SnmpUsing Atto ExpressNAV Using FTPUpdating firmware Inside out method TroubleshootingCheck basic diagnostic tools Check the host event logCheck the iPBridge Scsi port Check componentsCheck Scsi devices Check the serial portCheck the iPBridge Ethernet port Check the LAN/WANCheck the Operating System Performance issuesCheck the iSCSI OS driver Check the applicationsCheck the host system Reset to factory defaults Optimize Atto ExpressNAV in Internet ExplorerInterface options Using ExpressNAVUsing the serial port Opening an ExpressNAV sessionUsing Telnet EnterCable types Appendix a CablingScsi cabling ExamplesConnecting Scsi devices to the Scsi port Ethernet connectionsSymbol Indicates Appendix B CLI provides an ASCII-based interfaceCLI error messages CLI summaryCommand Default Example RmonAlphabetical CLI command explanations FirmwareRestart DumpConfigurationDate DeleteAllMapsISCSIAlias IPGatewayIPSubnetMask ISCSIChapReadOnlyPassword ISNSLoginControlPassword RestoreConfigurationSCSIPortResetOnStartup SaveConfigurationSCSIPortReset RouteSCSITargetLUNs SerialPortBaudRateSerialPortEcho SNMPDumpMIBUsername SpeedWriteDefaultSNTPServer VerboseModeXiii Appendix C Safety standards and compliances FCC Standards Radio and Television InterferencePage Xvi

1550D specifications

ATTO Technology 1550D is an advanced Thunderbolt 3 to 10Gb Ethernet adapter designed to enhance networking capabilities for professionals, content creators, and businesses. Known for its compact design and robust performance, the 1550D is engineered to provide a seamless and efficient connection to high-speed networks, making it an ideal solution for a variety of demanding applications.

One of the standout features of the ATTO 1550D is its ability to support high-bandwidth data transfers. With Thunderbolt 3 technology, users can achieve speeds up to 40Gbps, allowing for quick and efficient file transfers. This is particularly beneficial for users dealing with large files, such as video editing and data-intensive graphic design, where every second counts.

The ATTO 1550D also supports 10Gb Ethernet connections, which enables users to connect to existing network infrastructures with ease. This dual compatibility ensures that professionals can maintain productivity and workflow without the need for extensive infrastructure upgrades. The adapter's support for both static and dynamic IP addressing adds an extra layer of versatility, catering to diverse networking environments.

In terms of characteristics, the ATTO 1550D features a compact and durable design, making it portable and easy to integrate into any workspace. The sleek form factor allows for straightforward connectivity, fitting effortlessly into modern setup configurations. Moreover, its plug-and-play functionality means that users can quickly establish connections without the need for extensive setup processes or additional drivers.

The adapter also boasts advanced features such as link aggregation, which allows for increased throughput and redundancy, enhancing overall network performance. This is crucial for organizations that require reliable network connections to maintain operational efficiency. The ATTO 1550D is built with high-quality components that ensure durability and longevity, ideal for both field and studio environments.

Overall, the ATTO Technology 1550D positions itself as a premier solution in the realm of Thunderbolt 3 to Ethernet adapters, combining speed, reliability, and flexibility. Whether used for high-speed data transfers or stable network connectivity, it meets the demands of today's high-performance computing environments, making it an essential tool for tech-savvy professionals and businesses alike.
Top Page Image Contents