ATTO Technology 1550D operation manual Physical components

Page 8
Input voltage:

1.1 Physical components

The ATTO iPBridge 1550D is a 1-Gigabit Ethernet to Ultra 320 SCSI desktop bridge which produces a cost-effective iSCSI solution for SMB/SME environments.

Dimensions

Width: 7.5 inches wide

Depth: 5.0 inches long

Height: 1.76 inches

Environment

Operating Temperature: 0-70 °C external

Ambient air should not exceed 40 °C Humidity: 10-90% non-condensing

Power

The iPBridge 1550 uses a 12-volt power brick connected to an appropriate power source. The power source must be connected to a protective earth ground and comply with local electrical codes. Improper grounding may result in an electrical shock or damage to the unit.

12v@1.5A

100-240 VAC, 0.5A@100v, 47-63 Hz

SCSI port

The SCSI port is an Ultra 320 LVD/SE SCSI bus with 68-pin “P” interface; downward compatible with all forms of low voltage differential and single-ended SCSI.

Ethernet port

The 10/100/1000 GbE RJ-45 Ethernet port uses the Intel 8254x family gigabit Ethernet chipset to support iSCSI data transfer and inbound management. GbE cables must be at least CAT- 5E certified.

Serial port

An RS-232 serial port provides support for remote monitoring and management. The serial port is set at the factory at 115,200 bps.

Reset switch

A manual reset switch is mounted on the back panel. Insert a tool in the hole in the back panel to activate the switch, wait until the Activity LED on the top of the iPBridge becomes green, then cycle power. The iPBridge is reset to factory defaults

LED indicators

Ready/SCSI Port Activity: a green LED on the

top and on the back of the iPBridge lights solid green to indicate ready and blinks to show SCSI activity and to identify the iPBridge when commanded by software.

Ethernet port: two LEDs are integrated into the Ethernet connector. One lights solid green to denote a complete link and blinks green to show activity. A bicolor green/yellow LED lights yellow to indicate 1 Gb/sec. transmission speed and lights green to show 100 Mb/sec. speed.

3

ATTO Technology Inc. iPBridge Installation and Operation Manual

Image 8
Contents IPBridge 1550D Atto Technology, Inc Contents Appendix C Safety standards and compliances Xiv Updating firmwareInterface options Appendix a CablingPage Features Atto iPBridge provides storage optionsExhibit 1.0-1 Possible storage solutions using the iPBridge Physical components Exhibit 1.1-1 iPBridge 1550D back panel Installation Unpacking the packing box verifying contentsInstalling the iPBridge Installing Windows driversInstalling MS iSCSI Initiator for Windows Beginning initial configurationSelect Internet Options Uncheck the Require server verification check boxExpressWizard Configure the iPBridgePreliminary steps Page Default target node Automatically configure a single targetTarget management Target namesAutomatically configure multiple targets Manually configure multiple target nodesMultiple target nodes Click on the Map each device to its own target buttonExhibit 3.1-1 Target node configurations ISCSI configuration Chap commandsEthernet ISCSIModify passwords Set up a Vlan Virtual Local Area NetworkOptional changes Preliminary stepsISCSI performance configuration tool Windows only Enhance performanceRemote system monitoring SnmpUpdating firmware Using Atto ExpressNAVUsing FTP Troubleshooting Check basic diagnostic toolsInside out method Check the host event logCheck components Check Scsi devicesCheck the iPBridge Scsi port Check the serial portCheck the iPBridge Ethernet port Check the LAN/WANPerformance issues Check the iSCSI OS driverCheck the Operating System Check the applicationsCheck the host system Reset to factory defaults Optimize Atto ExpressNAV in Internet ExplorerUsing ExpressNAV Using the serial portInterface options Opening an ExpressNAV sessionUsing Telnet EnterAppendix a Cabling Scsi cablingCable types ExamplesConnecting Scsi devices to the Scsi port Ethernet connectionsSymbol Indicates Appendix B CLI provides an ASCII-based interfaceCLI error messages CLI summaryCommand Default Example RmonAlphabetical CLI command explanations DumpConfiguration DateFirmwareRestart DeleteAllMapsIPGateway IPSubnetMaskISCSIAlias ISCSIChapISNSLoginControl PasswordReadOnlyPassword RestoreConfigurationSaveConfiguration SCSIPortResetSCSIPortResetOnStartup RouteSerialPortBaudRate SerialPortEchoSCSITargetLUNs SNMPDumpMIBSpeedWriteDefault SNTPServerUsername VerboseModeXiii Appendix C Safety standards and compliances FCC Standards Radio and Television InterferencePage Xvi

1550D specifications

ATTO Technology 1550D is an advanced Thunderbolt 3 to 10Gb Ethernet adapter designed to enhance networking capabilities for professionals, content creators, and businesses. Known for its compact design and robust performance, the 1550D is engineered to provide a seamless and efficient connection to high-speed networks, making it an ideal solution for a variety of demanding applications.

One of the standout features of the ATTO 1550D is its ability to support high-bandwidth data transfers. With Thunderbolt 3 technology, users can achieve speeds up to 40Gbps, allowing for quick and efficient file transfers. This is particularly beneficial for users dealing with large files, such as video editing and data-intensive graphic design, where every second counts.

The ATTO 1550D also supports 10Gb Ethernet connections, which enables users to connect to existing network infrastructures with ease. This dual compatibility ensures that professionals can maintain productivity and workflow without the need for extensive infrastructure upgrades. The adapter's support for both static and dynamic IP addressing adds an extra layer of versatility, catering to diverse networking environments.

In terms of characteristics, the ATTO 1550D features a compact and durable design, making it portable and easy to integrate into any workspace. The sleek form factor allows for straightforward connectivity, fitting effortlessly into modern setup configurations. Moreover, its plug-and-play functionality means that users can quickly establish connections without the need for extensive setup processes or additional drivers.

The adapter also boasts advanced features such as link aggregation, which allows for increased throughput and redundancy, enhancing overall network performance. This is crucial for organizations that require reliable network connections to maintain operational efficiency. The ATTO 1550D is built with high-quality components that ensure durability and longevity, ideal for both field and studio environments.

Overall, the ATTO Technology 1550D positions itself as a premier solution in the realm of Thunderbolt 3 to Ethernet adapters, combining speed, reliability, and flexibility. Whether used for high-speed data transfers or stable network connectivity, it meets the demands of today's high-performance computing environments, making it an essential tool for tech-savvy professionals and businesses alike.