ATTO Technology 1550D Appendix B CLI provides an ASCII-based interface, Symbol Indicates

Page 32

Appendix B CLI provides an ASCII-based interface

The command line interface (CLI) uses ASCII commands typed while in CLI mode.

CAUTION

Do not use CLI unless you are directed to by an ATTO technician.

Changing parameters may cause loss of data and/or disruption to performance and reliability of the iPBridge.

The ExpressNAV interface is the preferred method to operate and manage the iPBridge. Refer to Interface options on page 23 for details.

The command line interface (CLI) is a set of ASCII-based commands which perform configuration and diagnostic tasks. Refer to Interface options on page 23.

•CLI commands are context sensitive and generally follow a standard format

•[GetSet] Command [Parameter1Parameter2] followed by the return or enter key

•CLI commands are case insensitive: you may type all upper or all lower case or a mixture. Upper and lower case in this manual and the help screen are for clarification only.

•Commands generally have three types of operation: get, set and immediate.

•The get form returns the value of a parameter or setting and is an informational command.

•Responses to get commands are followed by Ready.

•The set form is an action that changes the value of a parameter or configuration setting. It may require a SaveConfiguration command and a restart of the system before it is implemented. The restart can be accomplished as part of the SaveConfiguration command or by using a separate FirmwareRestart command. A number of set commands may be issued before the SaveConfiguration command.

•Responses to set commands are either an error message or Ready. *. The asterisk indicates you must use a SaveConfiguration command to finalize the set command.

•Set commands which do not require a SaveConfiguration command, defined as immediate commands, are immediately executed.

Note

Using certain CLI commands during normal operation can cause a performance drop. Once command actions are complete, performance should return to normal levels.

Exhibit A-2 Symbols, typefaces and abbreviations used to indicate functions and elements of the command line interface used in this manual.

Symbol

Indicates

 

 

 

[

]

Required entry

<

>

Optional entry

 

pick one of

 

-

a range (6 – 9 = 6, 7, 8, 9)

sb

SCSI bus number (n=1)

 

sl

SCSI LUN ID (0 <= sl <=63)

 

st

SCSI target ID (0 <= st <= 15)

dp1

Ethernet port used to manage the iPBridge

iii

ATTO Technology Inc. iPBridge Installation and Operation Manual

Page 31 Page 33
Image 32
Page 31 Page 33
Contents IPBridge 1550D Atto Technology, Inc Contents Appendix C Safety standards and compliances Xiv Updating firmwareInterface options Appendix a CablingPage Features Atto iPBridge provides storage optionsExhibit 1.0-1 Possible storage solutions using the iPBridge Physical components Exhibit 1.1-1 iPBridge 1550D back panel Installation Unpacking the packing box verifying contentsInstalling the iPBridge Installing Windows driversInstalling MS iSCSI Initiator for Windows Beginning initial configurationSelect Internet Options Uncheck the Require server verification check boxExpressWizard Configure the iPBridgePreliminary steps Page Default target node Automatically configure a single targetTarget management Target namesAutomatically configure multiple targets Manually configure multiple target nodesMultiple target nodes Click on the Map each device to its own target buttonExhibit 3.1-1 Target node configurations ISCSI configuration Chap commandsEthernet ISCSIModify passwords Set up a Vlan Virtual Local Area NetworkOptional changes Preliminary stepsISCSI performance configuration tool Windows only Enhance performanceRemote system monitoring SnmpUpdating firmware Using Atto ExpressNAVUsing FTP Troubleshooting Check basic diagnostic toolsInside out method Check the host event logCheck components Check Scsi devicesCheck the iPBridge Scsi port Check the serial portCheck the iPBridge Ethernet port Check the LAN/WANPerformance issues Check the iSCSI OS driverCheck the Operating System Check the applicationsCheck the host system Reset to factory defaults Optimize Atto ExpressNAV in Internet ExplorerUsing ExpressNAV Using the serial portInterface options Opening an ExpressNAV sessionUsing Telnet EnterAppendix a Cabling Scsi cablingCable types ExamplesConnecting Scsi devices to the Scsi port Ethernet connectionsSymbol Indicates Appendix B CLI provides an ASCII-based interfaceCLI error messages CLI summaryCommand Default Example RmonAlphabetical CLI command explanations DumpConfiguration DateFirmwareRestart DeleteAllMapsIPGateway IPSubnetMaskISCSIAlias ISCSIChapISNSLoginControl PasswordReadOnlyPassword RestoreConfigurationSaveConfiguration SCSIPortResetSCSIPortResetOnStartup RouteSerialPortBaudRate SerialPortEchoSCSITargetLUNs SNMPDumpMIBSpeedWriteDefault SNTPServerUsername VerboseModeXiii Appendix C Safety standards and compliances FCC Standards Radio and Television InterferencePage Xvi

1550D specifications

ATTO Technology 1550D is an advanced Thunderbolt 3 to 10Gb Ethernet adapter designed to enhance networking capabilities for professionals, content creators, and businesses. Known for its compact design and robust performance, the 1550D is engineered to provide a seamless and efficient connection to high-speed networks, making it an ideal solution for a variety of demanding applications.

One of the standout features of the ATTO 1550D is its ability to support high-bandwidth data transfers. With Thunderbolt 3 technology, users can achieve speeds up to 40Gbps, allowing for quick and efficient file transfers. This is particularly beneficial for users dealing with large files, such as video editing and data-intensive graphic design, where every second counts.

The ATTO 1550D also supports 10Gb Ethernet connections, which enables users to connect to existing network infrastructures with ease. This dual compatibility ensures that professionals can maintain productivity and workflow without the need for extensive infrastructure upgrades. The adapter's support for both static and dynamic IP addressing adds an extra layer of versatility, catering to diverse networking environments.

In terms of characteristics, the ATTO 1550D features a compact and durable design, making it portable and easy to integrate into any workspace. The sleek form factor allows for straightforward connectivity, fitting effortlessly into modern setup configurations. Moreover, its plug-and-play functionality means that users can quickly establish connections without the need for extensive setup processes or additional drivers.

The adapter also boasts advanced features such as link aggregation, which allows for increased throughput and redundancy, enhancing overall network performance. This is crucial for organizations that require reliable network connections to maintain operational efficiency. The ATTO 1550D is built with high-quality components that ensure durability and longevity, ideal for both field and studio environments.

Overall, the ATTO Technology 1550D positions itself as a premier solution in the realm of Thunderbolt 3 to Ethernet adapters, combining speed, reliability, and flexibility. Whether used for high-speed data transfers or stable network connectivity, it meets the demands of today's high-performance computing environments, making it an essential tool for tech-savvy professionals and businesses alike.
Top Page Image Contents