ATTO Technology 1550D operation manual Appendix C Safety standards and compliances

Page 43
• If necessary, consult an ATTO authorized dealer, ATTO Technical Support Staff, or an experienced radio/television technician for additional suggestions.

Appendix C Safety standards and compliances

The equipment described in this manual generates and uses radio frequency energy. If this equipment is not used in strict accordance with the manufacturer's instruction, it can and may cause interference with radio and television reception. See the Technical Specification sheet for a full list of certifications.

WARNING

Risk of explosion if battery is removed and/or replaced by an incorrect type. Dispose of used batteries in accordance with your local environmental regulations.

No operator serviceable components inside the iPBridge 1550D.

Do not remove cover of the iPBridge 1550D. Refer servicing to qualified personnel.

FCC Standards: Radio and Television Interference

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and

found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC rules, which are designed to provide a reasonable protection against such interference when operating in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures may be required to correct the interference.

If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures

• Move the receiving antenna.

• Relocate the bridge with respect to the receiver, or move the bridge away from the receiver.

• Plug the computer into a different outlet so the computer and receiver are on different branch circuits.

The booklet How to Identify and Resolve Radio/TV Interference Problems prepared by the Federal Com- munications Commission is a helpful guide. It is available from the US Government printing office, Wash- ington, DC 20402, Stock No. 004-000-00345-4.

Canadian Standards

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du

Canada.

European Standards: Declaration of Conformity

This following statement applies to the ATTO iPBridge.

This device has been tested in the basic operating configuration and found to be compliant with the following European Union standards

Application of Council Directive: 89/336/EEC

xiv

Page 42 Page 44
Image 43
Page 42 Page 44
Contents IPBridge 1550D Atto Technology, Inc Contents Appendix a Cabling Appendix C Safety standards and compliances XivUpdating firmware Interface optionsPage Atto iPBridge provides storage options FeaturesExhibit 1.0-1 Possible storage solutions using the iPBridge Physical components Exhibit 1.1-1 iPBridge 1550D back panel Installing Windows drivers InstallationUnpacking the packing box verifying contents Installing the iPBridgeUncheck the Require server verification check box Installing MS iSCSI Initiator for WindowsBeginning initial configuration Select Internet OptionsPreliminary steps Configure the iPBridgeExpressWizard Page Target names Default target nodeAutomatically configure a single target Target managementClick on the Map each device to its own target button Automatically configure multiple targetsManually configure multiple target nodes Multiple target nodesExhibit 3.1-1 Target node configurations ISCSI ISCSI configurationChap commands EthernetPreliminary steps Modify passwordsSet up a Vlan Virtual Local Area Network Optional changesEnhance performance ISCSI performance configuration tool Windows onlySnmp Remote system monitoringUsing FTP Using Atto ExpressNAVUpdating firmware Check the host event log TroubleshootingCheck basic diagnostic tools Inside out methodCheck the serial port Check componentsCheck Scsi devices Check the iPBridge Scsi portCheck the LAN/WAN Check the iPBridge Ethernet portCheck the applications Performance issuesCheck the iSCSI OS driver Check the Operating SystemCheck the host system Optimize Atto ExpressNAV in Internet Explorer Reset to factory defaultsOpening an ExpressNAV session Using ExpressNAVUsing the serial port Interface optionsEnter Using TelnetExamples Appendix a CablingScsi cabling Cable typesEthernet connections Connecting Scsi devices to the Scsi portAppendix B CLI provides an ASCII-based interface Symbol IndicatesCLI summary CLI error messagesRmon Command Default ExampleAlphabetical CLI command explanations DeleteAllMaps DumpConfigurationDate FirmwareRestartISCSIChap IPGatewayIPSubnetMask ISCSIAliasRestoreConfiguration ISNSLoginControlPassword ReadOnlyPasswordRoute SaveConfigurationSCSIPortReset SCSIPortResetOnStartupSNMPDumpMIB SerialPortBaudRateSerialPortEcho SCSITargetLUNsVerboseMode SpeedWriteDefaultSNTPServer UsernameXiii FCC Standards Radio and Television Interference Appendix C Safety standards and compliancesPage Xvi

1550D specifications

ATTO Technology 1550D is an advanced Thunderbolt 3 to 10Gb Ethernet adapter designed to enhance networking capabilities for professionals, content creators, and businesses. Known for its compact design and robust performance, the 1550D is engineered to provide a seamless and efficient connection to high-speed networks, making it an ideal solution for a variety of demanding applications.

One of the standout features of the ATTO 1550D is its ability to support high-bandwidth data transfers. With Thunderbolt 3 technology, users can achieve speeds up to 40Gbps, allowing for quick and efficient file transfers. This is particularly beneficial for users dealing with large files, such as video editing and data-intensive graphic design, where every second counts.

The ATTO 1550D also supports 10Gb Ethernet connections, which enables users to connect to existing network infrastructures with ease. This dual compatibility ensures that professionals can maintain productivity and workflow without the need for extensive infrastructure upgrades. The adapter's support for both static and dynamic IP addressing adds an extra layer of versatility, catering to diverse networking environments.

In terms of characteristics, the ATTO 1550D features a compact and durable design, making it portable and easy to integrate into any workspace. The sleek form factor allows for straightforward connectivity, fitting effortlessly into modern setup configurations. Moreover, its plug-and-play functionality means that users can quickly establish connections without the need for extensive setup processes or additional drivers.

The adapter also boasts advanced features such as link aggregation, which allows for increased throughput and redundancy, enhancing overall network performance. This is crucial for organizations that require reliable network connections to maintain operational efficiency. The ATTO 1550D is built with high-quality components that ensure durability and longevity, ideal for both field and studio environments.

Overall, the ATTO Technology 1550D positions itself as a premier solution in the realm of Thunderbolt 3 to Ethernet adapters, combining speed, reliability, and flexibility. Whether used for high-speed data transfers or stable network connectivity, it meets the demands of today's high-performance computing environments, making it an essential tool for tech-savvy professionals and businesses alike.
Top Page Image Contents