3 Hardware installation and initial configuration
You will need a basic understanding of Fibre Channel before installing the ATTO ExpressPCI host adapter. Please refer to Chapter 2 for a list of Fibre
WARNING ATTO Technology recommends that you back up your system data before changing or installing any hardware.
System requirements
Installation
WARNING ATTO ExpressPCI host adapters contain components that are sensitive to electrostatic discharge (ESD). ESD can cause damage to the ExpressPCI host adapter. Please follow standard methods to avoid ESD.
The ATTO ExpressPCI host adapter package contains the host adapter, the ATTO Express Pro- Tools CD and a warranty and registration card. If any of these items are missing, contact your ATTO authorized sales representative.
To install and use the ATTO ExpressPCI Fibre Channel adapter you will need:
❖A computer with an available PCI or
❖The complete ATTO ExpressPCI FC host adapter package.
Fibre Channel address
ATTO ExpressPCI host adapters are configured with a unique address designated by the Institute of Electrical and Electronic Engineers. The WorldWide Port Name (WWN) and Node name are the two components of the address assigned to Fibre Channel products. This address, which is stored in the NVRAM on the ATTO ExpressPCI host adapter, allows the system to recognize it as a unique part of your configuration. The address is clearly marked on the back of the board for easy identification. Please keep a reference copy of the number in a safe place or write in the space provided below.
ExpressPCI FC host adapter WWNs are assigned for each channel. The WWN listed on your host adapter is assigned to the first channel (0).
Sequential WWNs apply for additional channels.
WWN 0:_____________________
WWN 1_____________________
WWN 2_____________________(FC 3342 only)
WWN 3:____________________ (FC 3342 only)
1Power down the computer and unplug the computer from all power sources.
2Open the case.
3Install the ATTO ExpressPCI host adapter in any open PCI expansion slot. If you have questions about how to install an expansion card in your system, consult your computer’s documentation.
Exhibit
Bracket Screw
PCI Slots
Note: If you have difficulty seating the ATTO ExpressPCI host adapter in
4Connect Fibre Channel devices by inserting a Fibre Channel cable to the connector on the ATTO ExpressPCI host adapter until you hear a click.
5Close the case on the computer and power it up.
7 ATTO Technology ExpressPCI FC 3321, 3322 and 3342 Installation and Operation Manual