Apple 9000 manual Connecting an External Speaker

4Plug the A/V cable’s white connector into the left “audio out” port on your video player. Plug the cable’s red connector into the right “audio out” port on the video player.

•If you’re using an S-video or BNC cable, the yellow connec- tors on the A/V cable remain unused (Figure 12).

5Plug the A/V cable’s other white and red connectors to the left and right “audio in” ports on the projector directly above your video connection.

The projector is compatible with the these major broadcast video standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N and SECAM. It automatically adjusts to optimize its performance for the incoming video. The input signals for SECAM, PAL-M, and PAL-N video cannot be automatically detected, therefore they must be chosen manually; see “Video Standard” on page 33.

Connecting an External Speaker

To connect one or two external speakers, plug the speaker cable

into the (audio out) connectors on the projector. The external speaker’s volume is controlled by the projector; see “Volume” on page 25.

CAUTION: Your video player may also have a “Video Out” port for a coaxial cable connection. DO NOT use this to connect to the projector.

FIGURE 13

Connecting external speakers

15