Controls Menu Functions
Controls menu
Video Standard
When Auto is on, the projector attempts to pick the video stan- dard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N or SECAM) auto- matically based on the input signal it receives. (The video standard options may vary depending on your region of the world.) The input signals for SECAM, PAL-M, and PAL-N video cannot be automatically detected, therefore they must be chosen manually. If the projector is unable to detect the standard, the col- ors might not look right or the image might appear “torn.” If this happens, manually select a video standard by clicking the button and cycling through the standards.
Standby TIme
This option lets you select how long the lamp stays on and the blank screen is displayed when you enter standby mode before the projector turns off. Select among 1, 5, 10, and 15 minutes by clicking the button and cycling through the options.
NOTE: For model 9000-INT: To use video input, an optional video board must be installed in the pro- jector. Contact Boxlight for more information.
NOTE: If you already know the video standard used in your geo- graphical area, it’s often best to manually select it.
NOTE: Standby Time is applica- ble only when using RS-232 con- trol or a remote that has a standby button.
33
