Tripp Lite Power Suppy Important Safety Instructions, UPS Location Warnings, Battery Warnings

Page 2

200206186 SmartPro XL Owner’s Manual 93-2078.qxd 7/30/02 5:07 PM Page 2

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty.

UPS Location Warnings

Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight.

For best performance, keep the indoor temperature between between 32º F and 104º F (0º C and 40º C).

Leave adequate space around all sides of the UPS for proper ventilation.

UPS Connection Warnings

Connect your UPS directly to a properly grounded AC power outlet. Do not plug the UPS into itself; this will damage the UPS.

Do not modify the UPS's plug, and do not use an adapter that would eliminate the UPS’s ground connection.

Do not use extension cords to connect the UPS to an AC outlet. Your warranty will be voided if anything other than Tripp Lite surge suppressors are used to connect your UPS to an outlet.

If the UPS receives power from a motor-powered AC generator, the generator must provide clean, filtered, computer-grade output.

Equipment Connection Warnings

Do not use Tripp Lite UPS Systems for life support appliances in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.

Do not connect surge suppressors or extension cords to the output of your UPS. This might damage the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

Your UPS does not require routine maintenance. Do not open your UPS for any reason except battery replacement. There are no user-serviceable parts inside.

Battery replacement must be performed by qualified service personnel. Because the batteries present a risk of electrical shock and burn from high short-circuit current, observe proper precautions. Unplug and turn off the UPS before performing battery replacement. Use tools with insulated handles, and replace the existing batteries with the same number and type of new batteries (Sealed Lead-Acid). Do not open the batteries. Do not short or bridge the battery terminals with any object.

The UPS batteries are recyclable. Refer to local codes for disposal requirements, or in the USA only call 1-800-SAV-LEAD for recycling information. Do not dispose of the batteries in a fire.

Only connect Tripp Lite battery packs of the appropriate type and correct voltage to the external battery connector.

Do not connect or disconnect external batteries while the UPS is operating from battery.

Do not attempt to connect external batteries to models without an external battery connector.

2

Image 2
Contents SmartPro UPS Location Warnings Important Safety InstructionsBattery Warnings UPS Connection WarningsSelect UPS Operating Mode Connect your UPS to An electrical outletQuick Installation optional Charge only Mode Disables battery backup. UPS ButtonsIndicator Lights Other UPS FeaturesNorm Delay Service StorageManual de operación Advertencias sobre la conexión del UPS Importantes instrucciones de seguridadAdvertencias sobre la ubicación del UPS Advertencias sobre la conexión de equiposConecte el sistema UPS a una Toma de corriente Selección del modo de Operación del UPSInstalación rápida optativo Botones Modo de Charge only sólo carga Deshabilita elOperación básica continuación Luces indicadorasOtras características de este sistema UPS Norm Delay Almacenamiento ServicioFicha técnica continuación Guide de lutilisateur Mises en garde relatives au raccord du système UPS Mises en garde relatives à lemplacement du système UPSImportantes consignes de sécurité Mises en garde relatives au raccord de léquipementChoix du mode dexploitation du Système UPS Branchez votre système UPS Dans une prise de secteurBranchement dune batterie Externe modèles choisis Installation rapide facultativeCommunications USB Communications en série Commutateurs Exploitation de base suite Voyants lumineuxPorte de remplacement de la batterie Autres fonctionsNorm Delay Entreposage EntretienSpécifications suite

Power Suppy specifications

Tripp Lite is a renowned manufacturer of power protection and connectivity solutions, recognized especially for its high-quality power supplies. Their power supplies are designed to meet the needs of both consumers and businesses, ensuring stable and reliable power delivery.

One of the main features of Tripp Lite power supplies is their high efficiency. Many models are designed to meet or exceed the 80 PLUS certification, ensuring that they convert more than 80% of the incoming power into usable output while producing less heat. This efficiency not only helps in reducing energy costs but also contributes to a longer lifespan for the devices connected to the power supply.

Another significant characteristic is the protection mechanisms incorporated into Tripp Lite power supplies. They typically come equipped with features like overload protection, short circuit protection, and surge protection. This guarantees that both the power supply and connected devices are safeguarded against unexpected power surges, voltage spikes, and other electrical anomalies.

Tripp Lite also emphasizes versatility in its power supply offerings. Many models come with modular designs, enabling users to customize cable management according to their specific needs. Modular power supplies allow users to connect only the cables they require, promoting better airflow within the case, and making installations cleaner and more efficient.

Moreover, Tripp Lite power supplies are known for their robust build quality. They are often constructed with durable materials and include features such as silent operation and efficient cooling systems with strategically placed fans. This ensures that the power supply operates quietly while maintaining optimal temperatures during heavy loads.

In terms of technology, Tripp Lite incorporates advanced power management systems in their supplies. This includes features like Active PFC (Power Factor Correction), which enhances power efficiency, reduces energy costs, and ensures compatibility with a wide range of devices.

Finally, Tripp Lite offers a comprehensive warranty on its power supplies, reflecting the company's confidence in the reliability and performance of its products. This level of assurance provides peace of mind for consumers and businesses alike in choosing Tripp Lite as their power supply provider.

In summary, Tripp Lite power supplies are characterized by their high efficiency, robust protection mechanisms, modular designs, and advanced technologies, making them a popular choice for users who prioritize reliability and performance in their power solutions.