Tripp Lite 10KVA owner manual Important Safety Warnings

Page 2

Important Safety Warnings

SAVE THESE INSTRUCTIONS. This manual contains important instructions and warnings that should be followed during the installation and maintenance of all Tripp Lite SmartOnline Rackmount/Tower UPS Systems and their batteries.

UPS Location Warnings

•Install your UPS indoors, away from excess moisture or heat, direct sunlight, dust and conductive contaminants.

•Install your UPS in a structurally sound area. Your UPS is extremely heavy; take care when moving and lifting the unit.

•Only operate your UPS at indoor temperatures between 32° F and 104° F (between 0° C and 40° C). For best results, keep indoor temperatures between 62° F and 84° F (between 17° C and 29° C).

•Leave adequate space around all sides of the UPS for proper ventilation.

•Do not install the UPS near magnetic storage media, as this may result in data corruption.

•Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously inhibit the unit’s internal cooling, eventually causing product damage not covered under warranty.

UPS Connection Warnings

• The power supply for this unit must be single-phase rated in accordance with the equipment nameplate. It also must be suitably grounded.

Equipment Connection Warnings

•Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

•Connect your UPS power module’s and/or transformer module’s grounding terminal to a grounding electrode conductor.

•The UPS is connected to a DC energy source (battery). The output terminals may be live when the UPS is not connected to an AC supply.

Maintenance Warnings

•Your UPS power module, transformer module and battery module(s) do not require routine maintenance. Do not open them for any reason. There are no user-serviceable parts inside.

Battery Warnings

•Do not operate your UPS without connecting it to an external battery module.

•Connect only Tripp Lite battery modules (of the correct type and voltage) to your UPS power module's external battery connector.

•Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS before performing battery replacement. Use tools with insulated handles. There are no user-serviceable parts inside the UPS. Battery replacement should be performed only by authorized service personnel using the same number and type of batteries (sealed Lead-Acid). The batteries are recyclable. Refer to your local codes for disposal requirements or in the USA only call 1-800- SAV-LEAD or 1-800-8-BATTERY (1-800-822-8837) or visit www.rbrc.com for recycling information. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery for your UPS.

•Fuses should be replaced only by factory authorized personnel. Blown fuses should be replaced only with fuses of the same number and type.

•Service and repair should be done only by trained personnel. Prior to any service work performed on hardwired power modules, they should be turned off or manually bypassed via the transformer. Prior to any service work performed on power modules that plug directly into wall outlets, they should be turned off and unplugged. Note that potentially lethal voltages exist within this unit as long as the battery supply is connected.

•Do not connect or disconnect battery module(s) while the UPS is operating from the battery supply or when the transformer module is not in bypass mode (if your UPS system includes a transformer module with a bypass switch).

•During "hot-swap" battery module replacement your UPS will be unable to provide battery backup in the event of a blackout.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents SmartOnline Single-Phase 5kVA, 6kVA & 10kVA Important Safety Warnings Post Telecom Mounting Mounting RackPost Mounting Mounting Tower Features Power Module Front Panel ControlsFeatures Rear Panel see page 9 for feature descriptions Features Rear Panel see page 9 for feature descriptions Features Rear Panel see page 9 for feature descriptions Features Rear Panel Power Module Feature DescriptionBattery Module Feature Description ConnectionConnect the battery module to the power module Plug your equipment into the power modulePlug the power module into a wall receptacle Plug the transformer module into the power module Plug your equipment into the power module Transfer moduleHardwire the power module to your equipment Hardwire the power module to a utility power sourceHardwire the transformer module to a utility Power source Connect the power module to the transformer moduleHardwire the transformer module to your equipment Hardwire the power module to the transformer module Select the transformer module’s input voltageConnection Optional Connection RS-232 Serial Communication ConnectionPower ON/OFF 5kVA models only Power ON/OFF 6kVA and 10kVA models only Manual Bypass Operation Failed Self-Test OperationStartup Self-Test Overload Messages On Battery AlarmNormal Operation Bypass Messages Shutdown MessagesStorage ServiceYear Limited Warranty Regulatory Compliance Identification NumbersSpecifications SU6000RT3UXR SU10KRT3UHV* & SU10KRT3UManual del propietario Advertencias de seguridad importantes Montaje de 2 postes Telecomunicaciones Montaje BastidorMontaje de 4 postes Montaje en torre Características Controles del panel frontal del módulo de potenciaPage Módulo de potencia de 6 kVA Módulo de transformador de 6 kVA Módulo de batería para modelo de 6 kVAPage Descripción de características del módulo del transformador Características Panel continuaciónDescripción de características del módulo de potencia Conexión Descripción de características del módulo de bateríaConecte su equipo en el módulo de potencia Conecte el módulo de batería al módulo de potenciaConecte el módulo de transformador en el módulo de potencia Cablee el módulo de potencia a su equipo Conecte el módulo de potencia al módulo De transformador Cablee el módulo de transformador a su equipoSeleccione el voltaje de entrada del módulo De transformador Cablee el módulo de potencia al módulo de transformadorEntrada Interruptor de Interruptores/pantalla Conexión opcional Conexión de comunicación serie RS-232Encendido y apagado sólo en modelos de 5 kVA Encendido y apagado Sólo en modelos de 6 kVA y 10 kVA Modelos de 6 kVA y 10 kVA Panel frontal Fallo durante la auto-prueba OperaciónAuto-prueba de arranque Mensajes de sobrecarga Alarma On BatteryOperación normal Mensajes Bypass Mensajes de apagadoServicio Almacenamiento, Servicio y GarantíaAlmacenamiento Garantía limitada de 2 añosEspecificaciones Los paquetes incluyenManuel de lutilisateur Consignes de Sécurité Importantes Avertissements pour Connexion de lEquipementMontage à 2 supports Telecom Montage BaieMontage à 4 supports Montage Tour Commandes de Panneau Avant de Module dAlimentation Caractéristiques2524 Page Page Caractéristiques Panneau Arrière suite Description des Caractéristiques de Module dAlimentationConnexion Description des Caractéristiques de Module de BatterieBranchez le module dalimentation dans une prise murale Connexion suiteBranchez votre équipement dans le module dalimentation Branchez le module à piles au module dalimentationConnexion suite Soit 6kVA ou 10kVA + Modules de Batterie Câbler le module du transformateur à votre équipement Sélectionner la tension dentrée du module du Transformateur Sélectionner la tension dentrée du module du transformateur Connexion en Option Connexion Communication Série RS-232Alimentation en Marche/Arrêtée modèles 5kVA seulement Alimentation ON/OFF Modèles 6kVA et 10kVA seulement Opération Bypass Manuelle Modèles 6kVA et 10kVA seulement Echec de lAutotest FonctionnementAutotest de Démarrage Fonctionnement Normal Alarme Sur BatterieFonctionnement suite Messages de SurchargeMessages de Bypass Messages de FermetureEntretien Entreposage, Entretien, Garantie et AssuranceEntreposage Garantie Limitée à 2 AnsSpécifications Information sur le modèle Nos de modèle                                                                                                       200907004 932407-RU

10KVA specifications

The Tripp Lite 10KVA is a highly versatile and robust uninterruptible power supply (UPS) system designed to provide seamless power protection for critical applications. This unit is ideal for data centers, telecommunications equipment, and industrial applications where power stability is paramount. With a rated capacity of 10,000 VA, it ensures that your equipment remains operational during power outages or fluctuations.

One of the key features of the Tripp Lite 10KVA is its advanced battery management system. This technology not only prolongs the life of the batteries but also optimizes their performance. The UPS comes equipped with high-capacity batteries, allowing for extended backup times and ensuring that connected devices can function uninterrupted during emergencies.

Another notable feature is the inverter efficiency, which allows the UPS to convert stored battery power into reliable AC output with minimal loss. This is critical in high-demand scenarios where energy efficiency is essential. The Tripp Lite 10KVA also boasts a wide input voltage range and frequency compatibility, making it suitable for various electrical environments.

The unit incorporates multiple outlets, providing the flexibility to connect diverse devices simultaneously. Additionally, the Tripp Lite 10KVA includes an LCD display, offering real-time data on battery status, load levels, and operating conditions, which aids in proactive management of power resources.

For enhanced safety, the UPS is equipped with numerous protection features, including surge suppression, which protects sensitive equipment from voltage spikes. It also includes built-in circuit breakers to prevent overloads and short circuits, ensuring the safety of both the UPS and connected devices.

Networking capabilities are another standout characteristic of the Tripp Lite 10KVA. With optional SNMP support, users can monitor the UPS remotely, allowing for effective management and troubleshooting from virtually anywhere. This feature enhances system reliability and contributes to a more efficient operational workflow.

In conclusion, the Tripp Lite 10KVA is a powerful and reliable UPS solution that combines advanced technologies with thoughtful features to deliver unmatched performance. Its robust design, efficiency, and extensive safety measures make it a vital component for any organization looking to safeguard their critical power infrastructure. Whether for business continuity or equipment protection, the Tripp Lite 10KVA stands out as a premier choice in the UPS market.
Top Page Image Contents