Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the installation, operation, and storage of this product. Failure to heed these instructions and warnings will void the product warranty.
•The PDU provides convenient multiple outlets, but it DOES NOT provide surge or line noise protection for connected equipment.
•The PDU is designed for indoor use only in a controlled environment isolated from excess moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
•Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that eliminate the connection to ground.
•The power requirement for each item of equipment connected to the PDU must not exceed the individual outlet’s load rating.
•The total power requirement for equipment connected to the PDU must not exceed the maximum load rating for the PDU.
•Do not drill into or attempt to open any part of the PDU housing. There are no user- serviceable parts inside.
•Do not attempt to modify the PDU, including its input plugs and power cables.
•Do not attempt to use the PDU if any part of it is damaged.
•Do not attempt to mount the PDU to an insecure or unstable surface.
•Never attempt to install electrical equipment during a thunderstorm.
•Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
Monitored Rack PDU Features
•Network interface enables remote power monitoring and event notification
•Digital amp meter for
•Centralized management of hundreds of PDUs and environmental sensors with Tripp Lite’s free PowerAlert Network Management System
•Optional ENVIROSENSE accessory allows monitoring of network ambient temperature, humidity and up to three dry contacts
•Toolless
Switched Rack PDU Features
•Network interface enables remote power monitoring and individual outlet control
•Individually controllable outlets allow remote rebooting of
•Digital amp meter for
•Centralized management of hundreds of PDUs and environmental sensors with Tripp Lite’s free PowerAlert Network Management System
•Optional ENVIROSENSE accessory allows monitoring of network ambient temperature, humidity and up to three dry contacts
•Toolless
2
201112142 933151.indb 2 | 1/24/2012 2:09:50 PM |