Tripp Lite PDUMNV20 owner manual Configuration and Operation, Remote Monitoring and Control

Features continued

A B

Ethernet Port: Use this RJ-45 jack to connect the PDU to the network with a standard Ethernet patch cable. The Link LED A

and Status LED B indicate several operating conditions, as shown in the table below. This port is not compatible with PoE (Power Over Ethernet) applications.

Network Operating Conditions

ALink LED Color

Off	No Network Connection
Flashing Amber	100 Mbps Network Connection
Flashing Green	10 Mbps Network Connection

BStatus LED Color

Off	Card Not Initialized
Steady Green	Card Initialized and Operational
Flashing Amber	Error - Card Not Initialized

Configuration and Operation

Remote Monitoring and Control

The PDU provides remote monitoring A , outlet control B and more via Web browser, telnet and SNMP-based Network Management Systems. For more information about configuration and operation of the PDU via the PowerAlert Web browser interface, refer to the SNMPWEBCARD User's

Guide, included on the CD-ROM bundled A with the PDU.

B

10

201112142 933151.indb 10 1/24/2012 2:09:59 PM