Connecting the PDU, Power cord connection

Installation continued
Connecting the PDU
2-1(Models with IEC power inlet or 3-pole					C
IEC 309 plug only.) Select models have

a detachable power cord. Attach the					A
included power cord to the PDU by
inserting the IEC connector			of the
power cord into the IEC power inlet
located near the end of the PDU. Use
the included bracket		to secure the
power cord connection.				2-1	B

Note: Optionally, a user-supplied power cord
can be attached to the PDU by connecting it
to the IEC inlet. Do not attempt to attach a
user-supplied power cord unless it is certified
to be compatible with the input power source
that will be used by the PDU.
2-2(Optional - models with input plug					A
adapter only.) Select models include an
					B
input plug adapter that converts the
twist-lock input plug to a straight-blade
input plug. Attach the input plug
adapter	to the input plug		if you
wish to plug the PDU into a compatible
straight-blade outlet.

2-2

2-3Connect the input plug to a compatible AC power outlet. If the PDU does not have a circuit breaker, it should be provided with a branch-rated over- current protection device that matches the rated amperage of the PDU.

Note: The AC power source should not share a circuit with a heavy electrical load.

2-3

2-4(Optional) If you attached the cord retention bracket(s), tie each equipment power cord to the retention bracket. Attach each cord to the retention shelf by looping the cord and securing it with one of the included cable ties . Make sure that each cord can be unplugged from the PDU without removing the cable tie.

2-4

201112142 933151.indb 4

1/24/2012 2:09:52 PM

Installation continued

Connecting the PDU

power cord connection.