Tripp Lite PDUMNV20 owner manual Networking the PDU, Dynamic IP Address Assignment

Page 5
5-1 .

Installation continued

2-5Connect your equipment's input plugs

Ato the outlets B of the PDU. The LED C near each outlet (Switched Models Only) illuminates when the outlet is ready to distribute live AC power. The digital load meter D displays the total connected equipment load in amps. (Select models provide additional load data. See the Features section for more information.)

Note: In order to minimize interference among connected devices, connect each device to the nearest PDU outlet and coil excess power cord length.

D

A

B

C

2-5

Networking the PDU

Note: The MAC address of the PDU (a 12-digit string in this format: 000667xxxxxx) is printed on a label attached to the PDU enclosure.

If your network's DHCP server will assign a dynamic IP address to the PDU automatically, go to Step 3-1 . If you will assign a static IP address to the PDU manually, go to Step 4-1 . If you are uncertain which method to use, contact your network administrator for assistance before continuing the installation process.

Dynamic IP Address Assignment

3-1Connect PDU to Network: While the PDU is powered, connect a standard Ethernet patch cable to the RJ-45 Ethernet port A on the PDU.

Note: This port is not compatible with PoE (Power over Ethernet) applications. The PDU will attempt to obtain an IP address via DHCP. This may take as long as several minutes, depending on your network environment.

A

3-1

LINK

STATUS

SET

CONFIG

3-2Discover IP Address: Contact your network administrator to determine which dynamic IP address has been assigned to the PDU by the DHCP server. The PDU can be identified on the DHCP server by referring to its MAC address. (The MAC address is a 12-digit string in this format: 000667xxxxxx. Refer to the MAC address label attached to the PDU.) You may wish to request a long-term lease period for the IP address, depending on your application. After you have discovered the IP address, skip Steps 4-1through 4-6and proceed directly to Step

Static IP Address Assignment

4-1Determine IP Information: Before assigning a static IP address, you'll need to know the IP address, gateway address and subnet mask. If you do not have this information, contact your network administrator for assistance.

5

201112142 933151.indb 5

1/24/2012 2:09:54 PM

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Monitored Rack PDU Switched Rack PDU Features Important Safety InstructionsMonitored Rack PDU Features Mounting the PDU InstallationPower cord connection Connecting the PDUStatic IP Address Assignment Networking the PDUDynamic IP Address Assignment None Network Interface Parameters Testing Network ConnectionIEC 309 3-Pole Input Plug Available on select models FeaturesAccy Port The port is reserved for future expansion Remote Monitoring and Control Configuration and OperationLimited Warranty Warranty and Warranty Registration201112142 933151-EN Manual del propietario Características alternas de la PDU para Rack Instrucciones de seguridad importantesCaracterísticas de la PDU Monitoreada para Rack Montaje del PDU InstalaciónConexión del PDU Instalación continuaciónAsignación de una Dirección IP Estática Conectando Su PDU a la RedAsignación de una Dirección IP Dinámica 5Configure el PDU en Modo Terminal Probando la Conexión de Red Características Los modelos de 20-amp presentan un Interruptor para Características continuaciónPower over Ethernet / Energía sobre la Ethernet Control y monitoreo remoto Configuración y operaciónGarantía Limitada GarantíaManuel du propriétaire Caractéristiques de la PDU en bâti surveillée Importantes consignes de sécuritéMontage de lunité de distribution dalimentation PDU Caractéristiques de la PDU en bâti à liaison commutéeConnexion de lunité de distribution dalimentation PDU Installation suiteAffectation dune adresse IP statique Mise en réseau de lunité de distributionAffectation dune adresse IP dynamique 3Connecter la PDU à lordinateur Test de la connexion réseau Caractéristiques Caractéristiques suite PoE Power Over Ethernet Surveillance et commande à distance Configuration et fonctionnementGarantie Limitée Garantie
Top Page Image Contents