Entering Safe Mode

24.Toolbar (Continued)

Disconnecting the Remote Session

To disconnect the session, on the Toolbar, click the button. The Login page appears, allowing you to re-login or close the browser window. Tripp Lite Icon Menu Features

Right-clicking the Tripp Lite Icon will pull up a menu. From this menu you can access the connected devices using the following features. Disconnect: Disconnect the remote session by clicking Disconnect. You can also Disconnect by using the Disconnect button on the Toolbar.

About: This verifies the Client, Firmware, Keyboard/Mouse Emulation (KME) Firmware and Switch File Versions installed on your Netcommander IP.

Local Settings: Click Local Settings to pull up the Client Configuration Dialog Box. See figure below.

Pointer type: From the Drop-down menu you can change the appearance of the Client Computer Mouse Pointer. It can be set to appear as the Client Mouse Pointer directly on top of the Target Server Mouse Pointer (Default), as a dot or to not appear at all.

Hide Toolbar: Check this option to hide the Toolbar from the next reconnection onwards. To toggle the Toolbar on and off, press F9 or double-click the

System tray icon .

Full Screen Mode: Check this option to make the remote session screen appear in full screen mode from the next reconnection onwards.

To work in full screen mode:

1.Ensure that the Client computer has the same screen resolution as the Target Server.

2.Select the Full Screen option from the Icon Menu or press F11. The Internet Explorer window disappears, leaving the Internet Explorer menu bar at the top.

3.Right click the Internet Explorer menu bar and check Auto-Hide. The Internet Explorer menu bar disappears. You are in full screen mode.

To exit full screen mode:

Press F11. Or place the mouse at the top of the window to display the Internet Explorer toolbar and click Restore button.

Configuration: This only appears in the menu when an Administrator is logged in. Click Configuration to access the Web configuration interface.

25. Safe Mode

If you are in a situation where you can’t access the Web Configuration Interface using the usual method, you can do the following while in Safe Mode:

Restore Factory Defaults: When you cannot access the system (e.g. you have forgotten the Username or Password) you can restore the NetCommander IP’s factory defaults from the Safe Mode.

Restore the Device Firmware: If during a firmware update there is a power failure and you can no longer access the system, you can restore the device firmware from the Safe Mode.

1.Turn the NetCommander IP KVM Switch Off .

2.Press and hold down the Local button for 3-4 seconds, while at the same time powering up the Netcommander IP. The NetCommander IP boots up in Safe Mode.

3.When the NetCommander IP has booted up in Safe Mode, and you

are connected to a network with a DHCP server, a new IP Address will be pulled. Have your Network Administrator identify the newly assigned IP Address from the DHCP server. To help locate the IP Address in the DHCP server, reference the MAC Address located on the underside of the NetCommander IP. The device number (D.N.) can be found in the same location. If there is no DHCP server, the unit boots with the static IP address 192.168.2.155.

4.Open Internet Explorer and type the following into the Address box: http://192.168.x.xxx/config. (Do not start the address with HTTPS) Vista users need to log onto Internet Explorer in administrator mode. The Login Page appears. See figure below.

5.Type Username: admin and Password: SAFEmode. (Case sensitive). This username and password works only in Safe mode. A menu appears, see figure below.

B070-016-19-IP specifications

The Tripp Lite B070-016-19-IP is a highly versatile 16-port KVM switch that serves as a reliable solution for managing multiple servers or computers from a single set of keyboard, video monitor, and mouse. This device is particularly useful in data centers, server rooms, and other environments where space and efficient management are crucial.

One of the standout features of the B070-016-19-IP is its ability to support remote access. With built-in IP capabilities, administrators can manage connected devices from anywhere in the world, enhancing operational efficiency. This is particularly important in today's increasingly mobile work environments, where remote troubleshooting and management can save time and resources.

The switch supports a variety of video resolutions up to 1920 x 1200, which ensures sharp and clear visual output, making it suitable for high-definition applications. Additionally, it is compatible with all major operating systems, further ensuring versatility in a multi-platform environment. The B070-016-19-IP features a compact design that can be easily integrated into existing systems without requiring significant reconfiguration.

The device employs advanced security measures for remote access, including enhanced encryption to protect sensitive data and server access. This includes features such as user authentication and various access levels, ensuring that only authorized personnel can manage the systems.

Built for durability and reliability, the Tripp Lite B070-016-19-IP is designed with robust construction that can withstand the rigors of daily operation in demanding environments. The device also includes a built-in firmware upgrade capability, keeping it up to date with the latest advancements and features.

In terms of connectivity, the switch offers multiple interfaces, allowing for seamless integration with various hardware configurations. It utilizes standard RJ-45 ports for connection, making installation straightforward and efficient.

Overall, the Tripp Lite B070-016-19-IP KVM switch stands out for its powerful blend of features, flexibility, and security, making it an ideal choice for IT professionals who require efficient management of multiple servers or computers. Whether used in a data center or an office, this KVM switch provides the tools necessary for effective system administration and optimal resource utilization.