Tripp Lite B070-016-19-IP warranty On Screen Display OSD, Restoring Factory Defaults

Page 20

25.Safe Mode (Continued)

Restoring Factory Defaults

1.From the Safe Mode Menu choose Restore Factory Settings. A warning appears, see figure below.

2.Click Restore. A further warning appears, see figure below.

3.Click OK, the factory defaults are restored. When the process finishes the figure below appears.

4.Click Reboot to restart the unit.

Restoring the Device Firmware

Contact Tripp Lite Technical Support at 773-869-1234 to receive the Upgrade firmware required to restore the device firmware. Save the Upgrade firmware on the hard disk of a computer connected to the network.

To restore the device firmware:

1.From the Safe Mode Menu choose Firmware Upgrade.

2.Locate the Upgrade firmware and click Install, then click Start Upgrade. When the process finishes the figure below appears.

3.Click Reboot to restart the unit.

26. On Screen Display (OSD)

Switching Between Computers

When at the local console you can switch between connected computers using Keyboard Hotkeys and the OSD.

Keyboard Hotkeys: To switch to the next computer, press and release the [Shift] key, then press the [+] key. To switch to the previous computer, press and release the [Shift] key, then press the [-] key.

Note: You can use the [+] key of the alphanumeric section or of the numeric keypad on a US English keyboard. With a Non-US English keyboard, use the [+] key of the numeric keypad only.

The On Screen Display (OSD)

Before accessing the OSD, make sure that the NetCommander IP is not being accessed remotely. (The Remote LED on the front of the unit will be lit if a remote session is in progress.) To gain access to the NetCommander IP, press the Local button on the front of the unit.

Press and release the Shift key twice to open the OSD Main Menu. Lines with Blue text represent ports that have a computer/server connected to them, which is currently turned on. Lines with Gray text represent ports that either have a computer/server connected to them, which is turned off; or they have no computer/server connected at all. The Type column indicates whether a computer/server (C) is connected to the port or a KVM Switch

(S)is connected to the port. For the Type column to display S, the user must change the Hotkey setting for the cascaded KVM.

Navigating the OSD: To move up and down, use the and arrow keys.

To jump from one column to the next (when relevant), use the [Tab] key. ToPort Number Appears hereC=computerInstruction Keys exit the OSD or to return to the previous OSD window, press [Esc].

Selecting a computer: To select a computer:

1.Move to the desired computer line.

2.Press the Enter key. The selected computer will be accessed and the OSD screen will close.

Note: While the OSD Screen is active the Keyboard Hotkey Commands and Mouse will be deactivated.

20

Image 20
Contents Table of Contents User’s GuideImportant Safety Instructions IntroductionSystem Components CompatibilityFeatures Front View88. Keyboard Back ViewPost Rackmounting Rackmount InstallationStandard Rackmounting Connecting Server Interface Units SIUs to the KVM Switch Connection Single KVM SwitchConnecting Computers to the KVM Switch Static IP Addresses for Multiple KVM Switches Connection Cascading Multiple KVM SwitchesInitial Settings Default IP Address Logging into the Web Configuration Interface Windows Vista InstructionsNetwork Configuration Screen LOggingNetwork Snmp Settings Administration User SettingsInstall Switch Definition File Administration Switch ConfigurationAdministration User Targets Click Save & Restart Security SettingsSecurity SSL Certificate Maintenance Firmware Upgrade Restore Factory SettingsTo restore factory settings Saving Changes & Logging OutStarting a Remote Session Taking Over a Busy Remote SessionToolbar Adjusting the Video settings Keyboard Key SequencesClick Start Recording Click Stop RecordingSynchronizing Mouse Pointers Pre-Mouse Synchronization TipsTroubleshooting Tips Manual Mouse SynchronizationEntering Safe Mode Safe ModeDisconnecting the Remote Session Restoring Factory Defaults Switching Between ComputersOn Screen Display OSD Restoring the Device FirmwareOSD Settings F2 General SettingsSecurity Changing the OSD HotkeyPort Settings Editing the Keyboard KB Column Adding/Changing a Hotkey Hkey for Cascaded KVM SwitchesTime Settings User Settings Security SettingsSecurity OSD Help Window F1Tuning F5 Upgrading the NetCommander IP FirmwareScanning Computers F4 Moving the Label F6Connecting the RS-232 Serial Firmware Upgrade Cable Installing the SoftwareStarting and Configuring the KVM Update Verifying the Version NumbersObtaining New Firmware Updating the Firmware Troubleshooting Resetting the KVM Switch or SIUsSetting Default Values for the OSD Get StatusSpecifications Storage and ServiceWarranty Registration Warranty & Warranty RegistrationLimited Warranty Manual del usuario ÍndiceInstrucciones Instrucciones de seguridad importantesComponentes del sistema CompatibilidadCaracterísticas Vista frontal88. Teclado Vista posteriorMontaje en rack de 2 postes Instalación en rackMontaje en rack estándar Conexión de un solo multiplexor KVM Conexión de computadoras al multiplexor KVMDirección IP estática para varios multiplexores KVM Conexión en cascada de varios multiplexores KVMAjustes iniciales dirección IP predefinida Instrucciones para Windows Vista Red Pantalla de configuración Inicio de sesiónAdministración Ajustes del usuario Red Ajustes SnmpAdministración Configuración del multiplexor Administración Objetivos del usuarioSeguridad Ajustes Seguridad Certificado SSLProcedimiento para guardar los cambios y cerrar la sesión Mantenimiento Actualización del firmwareRestauración de los ajustes de fábrica Procedimiento para restaurar los ajustes de fábricaInicio de una sesión remota Control de una sesión remota visitada por varios usuariosBarra de herramientas Procedimiento para ocultar la barra de herramientasProcedimiento para desplazarse a otro servidor Procedimiento para modificar los ajustes de desempeñoSecuencias de teclas Keyboard Key Sequences Configuración de los ajustes de videoBarra de herramientas continuación Haga clic en Iniciar grabación Start Recording Haga clic en Detener grabación Stop RecordingSincronización de los punteros de los ratones Consejos previos a la sincronización de los ratonesConsejos para solucionar problemas Sincronización manual del ratón Manual Mouse SynchronizationProcedimiento para ingresar al modo Seguro Safe Modo Seguro SafeProcedimiento para desconectar la sesión remota Modo Seguro Safe continuación Despliegue en pantalla OSDDespliegue en pantalla OSD continuación Ajustes del OSD, tecla F2Ajustes generales SeguridadAjustes del puerto Salto automáticoPuerto serie Procedimiento para editar el nombre del multiplexorAjustes de tiempo Ajustes del puerto continuaciónProcedimiento para editar la columna Teclado KB Seguridad Ajustes del usuarioAjustes de seguridad Ventana de ayuda Help del OSD F1Actualización del firmware del NetCommander IP Exploración de computadoras F4Ajuste fino F5 Procedimiento para mover la etiqueta F6Verificación de los números de versión Actualización del firmware del NetCommander IP continuaciónInstalación del software Actualización del firmware del NetCommander IP continuación Procedimiento para obtener información sobre el estado Actualización del firmware del NetCommander IPcontinuaciónSolución de problemas Especificaciones Almacenamiento y servicio técnicoGarantía y registro de la garantía Póliza DE GarantíaGuide de l’utilisateur Table des matièresInstructions Instructions de sécurité importantes Composants du système CompatibilitéVue arrière CaractéristiquesVue avant Montage en étagère à 2 poteaux Installation en étagèreMontage en étagère standard Connexion Commutateur KVM simple Raccorder les ordinateurs au commutateur KVMAdresses IP statiques pour commutateurs KVM multiples Configuration initiale Adresse IP par défautConnexion Commutateurs KVM multiples en guirlande Connexion à linterface de configuration Web Instructions pour Windows VistaConnexion Connexion à linterface de configuration Web Suite12. Réseau Ecran de configuration Administration paramètres dutilisateur 13. Réseau paramètres SnmpInstaller le dossier de définition du commutateur Administration configuration du commutateurAdministration cibles utilisateurs Cliquez sur Enregistrer et Redémarrer 17. Sécurité Paramètres18. Sécurité certificat SSL Pour restaurer les réglages dusine Entretien mise à niveau de microprogrammeRestaurer les réglages dusine Prise en charge dune session à distance encombrée Enregistrer les modifications et Fermer une sessionLancer une session à distance Barre doutils Séquences des touches du clavier Barre doutils SuiteAjuster les paramètres Vidéo Cliquez sur Start Recording Commencer lenregistrement Cliquez sur Stop Recording Arrêter lenregistrementSynchronisation des curseurs Conseils de pré-synchronisation SourisSynchronisation Manuelle de Souris Conseils de dépannageDéconnexion de la session à distance Mode sans échecEntrer dans le Mode sans échec Mode sans échec Suite Affichage à lécran A.EAffichage à lécran A.E Suite Réglages A.E. F2Paramètres généraux SécuritéParamètres de ports Port sérieModifier le nom du commutateur Remettre à zéro le Menu des Paramètres généraux F7Paramètres temporels Paramètres de ports SuiteModifier la Colonne du Clavier KB 28. Sécurité Paramètres de lutilisateurParamètres de sécurité Fenêtre Aide A.E F1Mise à niveau du microprogramme NetCommander IP Balayage dordinateurs F4Optimisation F5 32. Déplacer létiquette F6Mise à niveau du microprogramme NetCommander IPSuite Installation du logicielLancer et configurer la mise à niveau du KVM Brancher le câble série de mise à niveau RS-232Mise à niveau du microprogramme Vérifier les numéros de versionObtenir un nouveau microprogramme 34. Dépannage Remettre à zéro le commutateur KVM ou SIUsMise en place des valeurs par défaut de lA.E Obtenir le StatutEntreposage et Service Résolutions Vidéo et fréquences de rafraîchissementSpécifications techniques EntreposageEnregistrement de la garantie Garantie et enregistrement de garantieGarantie limitée
Related manuals
Manual 58 pages 51.36 Kb Manual 1 pages 43.68 Kb

B070-016-19-IP specifications

The Tripp Lite B070-016-19-IP is a highly versatile 16-port KVM switch that serves as a reliable solution for managing multiple servers or computers from a single set of keyboard, video monitor, and mouse. This device is particularly useful in data centers, server rooms, and other environments where space and efficient management are crucial.

One of the standout features of the B070-016-19-IP is its ability to support remote access. With built-in IP capabilities, administrators can manage connected devices from anywhere in the world, enhancing operational efficiency. This is particularly important in today's increasingly mobile work environments, where remote troubleshooting and management can save time and resources.

The switch supports a variety of video resolutions up to 1920 x 1200, which ensures sharp and clear visual output, making it suitable for high-definition applications. Additionally, it is compatible with all major operating systems, further ensuring versatility in a multi-platform environment. The B070-016-19-IP features a compact design that can be easily integrated into existing systems without requiring significant reconfiguration.

The device employs advanced security measures for remote access, including enhanced encryption to protect sensitive data and server access. This includes features such as user authentication and various access levels, ensuring that only authorized personnel can manage the systems.

Built for durability and reliability, the Tripp Lite B070-016-19-IP is designed with robust construction that can withstand the rigors of daily operation in demanding environments. The device also includes a built-in firmware upgrade capability, keeping it up to date with the latest advancements and features.

In terms of connectivity, the switch offers multiple interfaces, allowing for seamless integration with various hardware configurations. It utilizes standard RJ-45 ports for connection, making installation straightforward and efficient.

Overall, the Tripp Lite B070-016-19-IP KVM switch stands out for its powerful blend of features, flexibility, and security, making it an ideal choice for IT professionals who require efficient management of multiple servers or computers. Whether used in a data center or an office, this KVM switch provides the tools necessary for effective system administration and optimal resource utilization.