5. Features
Front View
11. Auto: When the LCD Menu is closed, pressing the AUTO button will perform an Auto Adjust on the monitor screen. When the LCD Menu is open, pressing the AUTO button will bring you back to the previous screen/selection. If the LCD Menu cannot go back any further, the AUTO button will close down the menu.
22. Menu: When the LCD Menu is closed, pressing the MENU button will open it. When the LCD Menu is open, pressing the MENU button will select a highlighted option.
33. On/Off Button: Pressing this button will turn the monitor screen on or off.
44. < : When the LCD Menu is open, pressing the < button will move the highlight bar to the left. When modifying a selected option, pressing the < button will decrease the option.
55. > : When the LCD Menu is open, pressing the > button will move the highlight bar to the right. When modifying a selected option, pressing the > button will increase the option.
66. Handle: Pull to slide the module out; push to slide the module in.
77. 19” LCD Monitor: After sliding the module out, flip up the cover to access the LCD monitor, keyboard and touch pad.
88. Keyboard
99. Slide Release: Mechanism to lock the drawer closed when the console is not in use. Prevents it from accidentally sliding open. To slide the console out, you must first release it by moving the tab sideways.
10 Rackmounting Brackets: There are rackmount brackets to secure the chassis to a system rack located at each corner of the unit.
11
12 LCD Display Controls: The LCD OSD controls located here control the position and picture settings of the LCD display. See LCD OSD configuration for details.
13 Railway Release Tabs: When the drawer is completely pulled out to the end, the railway system will lock. Push the release tabs on both sides to release the drawer so that it can be pushed back in.
7
12
8
11
610
13
9
1 2 3 4 5
7
Back View
11. Power Socket: The power cord from the AC power source plugs in here.
22. Firmware Upgrade Port: Plug the included firmware cable into this port to download firmware upgrade data.
33. CPU Port Section: Plug Cat5e cables from each PC or server into these ports.
44. KVM Console Ports*
55. Integrated Console Ports*
66. LAN Port: This RJ45 port enables connection to 10/100mb Ethernet. The LINK LED illuminates to indicate a LAN connection. The REMOTE LEED illuminates to indicate that a remote session is in progress.
77. Serial Port: The serial port is not currently functional. It is provided for possible functionalities that may be made available in future firmware upgrades.
*The
1
KVM CONSOLE PORTS
4
SERIAL | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
INTEGRATED
CONSOLE PORTS
|
|
|
|
|
|
|
|
|
|
| ||
UPGRADE | LAN | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| MODEL: | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| | | |
2 | 6 | 3 | 5 |
4