Tripp Lite B070-016-19-IP warranty Scanning Computers F4, Tuning F5, Moving the Label F6

Page 25

30. Scanning Computers (F4)

The amount of time spent on a computer when Auto Scanning is adjustable.

To activate scanning:

1.Press the [Shift] key twice to activate the OSD.

2.Press the [F4] key.

Each active computer will be displayed in sequence. A Scan label appears in the top left corner.

To deactivate scanning:

Press [F4].

31. Tuning (F5)

You can tune the image of any remote computer screen. To adjust the screen image:

1.In the OSD Main Menu highlight the computer you want to adjust.

2.Press the [F5] key. The screen image of the selected computer is displayed, along with the Image Tuning label.

3.Adjust the image by using the Right and Left Arrow keys.

4.When the image is satisfactory, press [Esc].

Note! Distance affects picture quality. The further away a remote computer is from the KVM, the lower the image quality and the more tuning needed. Therefore put any higher resolution computers closer to the KVM.

32. Moving the Label (F6)

You can position the OSD label anywhere on the screen. To position the label from the Main window:

1.Move to the desired computer using the Up and Down Arrow keys.

2.Press the [F6] key. The selected screen image and Identification label are displayed.

3.Use the arrow keys to move the label to the desired position.

4.Press [Esc] to save and exit.

33. Upgrading the NetCommander IP Firmware

System Requirements for Firmware Upgrade

Pentium 166 or higher with 16MB RAM and 10MB free Hard Drive space

Free Serial port

Windows 2000 and later

To update the firmware the KVM system must be connected and switched on.

Software

With the NetCommander KVM Update software program you can upgrade the firmware for the:

OSD

B070-016-19-IP KVM

Server Interface Units

KVM Update enables you to add new features and take advantage of product improvements in a quick and efficient manner.

25

Image 25
Contents User’s Guide Table of ContentsIntroduction Important Safety InstructionsCompatibility System ComponentsFront View Features88. Keyboard Back ViewStandard Rackmounting Rackmount InstallationPost Rackmounting Connecting Computers to the KVM Switch Connection Single KVM SwitchConnecting Server Interface Units SIUs to the KVM Switch Initial Settings Default IP Address Connection Cascading Multiple KVM SwitchesStatic IP Addresses for Multiple KVM Switches Windows Vista Instructions Logging into the Web Configuration InterfaceLOgging Network Configuration ScreenAdministration User Settings Network Snmp SettingsAdministration User Targets Administration Switch ConfigurationInstall Switch Definition File Security SSL Certificate Security SettingsClick Save & Restart Restore Factory Settings Maintenance Firmware UpgradeTo restore factory settings Saving Changes & Logging OutTaking Over a Busy Remote Session Starting a Remote SessionToolbar Keyboard Key Sequences Adjusting the Video settingsClick Stop Recording Click Start RecordingSynchronizing Mouse Pointers Pre-Mouse Synchronization TipsManual Mouse Synchronization Troubleshooting TipsDisconnecting the Remote Session Safe ModeEntering Safe Mode Switching Between Computers Restoring Factory DefaultsOn Screen Display OSD Restoring the Device FirmwareGeneral Settings OSD Settings F2Security Changing the OSD HotkeyPort Settings Time Settings Adding/Changing a Hotkey Hkey for Cascaded KVM SwitchesEditing the Keyboard KB Column Security Settings User SettingsSecurity OSD Help Window F1Upgrading the NetCommander IP Firmware Tuning F5Scanning Computers F4 Moving the Label F6Installing the Software Connecting the RS-232 Serial Firmware Upgrade CableStarting and Configuring the KVM Update Verifying the Version NumbersObtaining New Firmware Updating the Firmware Resetting the KVM Switch or SIUs TroubleshootingSetting Default Values for the OSD Get StatusStorage and Service SpecificationsLimited Warranty Warranty & Warranty RegistrationWarranty Registration Índice Manual del usuarioInstrucciones de seguridad importantes InstruccionesCompatibilidad Componentes del sistemaVista frontal Características88. Teclado Vista posteriorMontaje en rack estándar Instalación en rackMontaje en rack de 2 postes Conexión de computadoras al multiplexor KVM Conexión de un solo multiplexor KVMAjustes iniciales dirección IP predefinida Conexión en cascada de varios multiplexores KVMDirección IP estática para varios multiplexores KVM Instrucciones para Windows Vista Inicio de sesión Red Pantalla de configuraciónRed Ajustes Snmp Administración Ajustes del usuarioAdministración Objetivos del usuario Administración Configuración del multiplexorSeguridad Certificado SSL Seguridad AjustesMantenimiento Actualización del firmware Procedimiento para guardar los cambios y cerrar la sesiónRestauración de los ajustes de fábrica Procedimiento para restaurar los ajustes de fábricaControl de una sesión remota visitada por varios usuarios Inicio de una sesión remotaProcedimiento para ocultar la barra de herramientas Barra de herramientasProcedimiento para desplazarse a otro servidor Procedimiento para modificar los ajustes de desempeñoBarra de herramientas continuación Configuración de los ajustes de videoSecuencias de teclas Keyboard Key Sequences Haga clic en Detener grabación Stop Recording Haga clic en Iniciar grabación Start RecordingSincronización de los punteros de los ratones Consejos previos a la sincronización de los ratonesSincronización manual del ratón Manual Mouse Synchronization Consejos para solucionar problemasProcedimiento para desconectar la sesión remota Modo Seguro SafeProcedimiento para ingresar al modo Seguro Safe Despliegue en pantalla OSD Modo Seguro Safe continuaciónAjustes del OSD, tecla F2 Despliegue en pantalla OSD continuaciónAjustes generales SeguridadSalto automático Ajustes del puertoPuerto serie Procedimiento para editar el nombre del multiplexorProcedimiento para editar la columna Teclado KB Ajustes del puerto continuaciónAjustes de tiempo Ajustes del usuario SeguridadAjustes de seguridad Ventana de ayuda Help del OSD F1Exploración de computadoras F4 Actualización del firmware del NetCommander IPAjuste fino F5 Procedimiento para mover la etiqueta F6Instalación del software Actualización del firmware del NetCommander IP continuaciónVerificación de los números de versión Actualización del firmware del NetCommander IP continuación Solución de problemas Actualización del firmware del NetCommander IPcontinuaciónProcedimiento para obtener información sobre el estado Almacenamiento y servicio técnico EspecificacionesPóliza DE Garantía Garantía y registro de la garantíaTable des matières Guide de l’utilisateurInstructions de sécurité importantes  InstructionsCompatibilité Composants du systèmeVue avant CaractéristiquesVue arrière Montage en étagère standard Installation en étagèreMontage en étagère à 2 poteaux Raccorder les ordinateurs au commutateur KVM Connexion Commutateur KVM simpleConnexion Commutateurs KVM multiples en guirlande Configuration initiale Adresse IP par défautAdresses IP statiques pour commutateurs KVM multiples Instructions pour Windows Vista Connexion à linterface de configuration Web12. Réseau Ecran de configuration Connexion à linterface de configuration Web SuiteConnexion 13. Réseau paramètres Snmp Administration paramètres dutilisateurAdministration cibles utilisateurs Administration configuration du commutateurInstaller le dossier de définition du commutateur 18. Sécurité certificat SSL 17. Sécurité ParamètresCliquez sur Enregistrer et Redémarrer Restaurer les réglages dusine Entretien mise à niveau de microprogrammePour restaurer les réglages dusine Lancer une session à distance Enregistrer les modifications et Fermer une sessionPrise en charge dune session à distance encombrée Barre doutils Ajuster les paramètres Vidéo Barre doutils SuiteSéquences des touches du clavier Cliquez sur Stop Recording Arrêter lenregistrement Cliquez sur Start Recording Commencer lenregistrementSynchronisation des curseurs Conseils de pré-synchronisation SourisConseils de dépannage Synchronisation Manuelle de SourisEntrer dans le Mode sans échec Mode sans échecDéconnexion de la session à distance Affichage à lécran A.E Mode sans échec SuiteRéglages A.E. F2 Affichage à lécran A.E SuiteParamètres généraux SécuritéPort série Paramètres de portsModifier le nom du commutateur Remettre à zéro le Menu des Paramètres généraux F7Modifier la Colonne du Clavier KB Paramètres de ports SuiteParamètres temporels Paramètres de lutilisateur 28. SécuritéParamètres de sécurité Fenêtre Aide A.E F1Balayage dordinateurs F4 Mise à niveau du microprogramme NetCommander IPOptimisation F5 32. Déplacer létiquette F6Installation du logiciel Mise à niveau du microprogramme NetCommander IPSuiteLancer et configurer la mise à niveau du KVM Brancher le câble série de mise à niveau RS-232Obtenir un nouveau microprogramme Vérifier les numéros de versionMise à niveau du microprogramme Remettre à zéro le commutateur KVM ou SIUs 34. DépannageMise en place des valeurs par défaut de lA.E Obtenir le StatutRésolutions Vidéo et fréquences de rafraîchissement Entreposage et ServiceSpécifications techniques EntreposageGarantie limitée Garantie et enregistrement de garantieEnregistrement de la garantie
Related manuals
Manual 58 pages 51.36 Kb Manual 1 pages 43.68 Kb

B070-016-19-IP specifications

The Tripp Lite B070-016-19-IP is a highly versatile 16-port KVM switch that serves as a reliable solution for managing multiple servers or computers from a single set of keyboard, video monitor, and mouse. This device is particularly useful in data centers, server rooms, and other environments where space and efficient management are crucial.

One of the standout features of the B070-016-19-IP is its ability to support remote access. With built-in IP capabilities, administrators can manage connected devices from anywhere in the world, enhancing operational efficiency. This is particularly important in today's increasingly mobile work environments, where remote troubleshooting and management can save time and resources.

The switch supports a variety of video resolutions up to 1920 x 1200, which ensures sharp and clear visual output, making it suitable for high-definition applications. Additionally, it is compatible with all major operating systems, further ensuring versatility in a multi-platform environment. The B070-016-19-IP features a compact design that can be easily integrated into existing systems without requiring significant reconfiguration.

The device employs advanced security measures for remote access, including enhanced encryption to protect sensitive data and server access. This includes features such as user authentication and various access levels, ensuring that only authorized personnel can manage the systems.

Built for durability and reliability, the Tripp Lite B070-016-19-IP is designed with robust construction that can withstand the rigors of daily operation in demanding environments. The device also includes a built-in firmware upgrade capability, keeping it up to date with the latest advancements and features.

In terms of connectivity, the switch offers multiple interfaces, allowing for seamless integration with various hardware configurations. It utilizes standard RJ-45 ports for connection, making installation straightforward and efficient.

Overall, the Tripp Lite B070-016-19-IP KVM switch stands out for its powerful blend of features, flexibility, and security, making it an ideal choice for IT professionals who require efficient management of multiple servers or computers. Whether used in a data center or an office, this KVM switch provides the tools necessary for effective system administration and optimal resource utilization.