Moxa Technologies Removing an Existing CP-168U Board Configuration, Updating the Driver

Software Installation

4.Next, refer to the instructions from the “First Time Driver Installation” subsection.

Removing an Existing CP-168U Board Configuration

First shut down your PC, and then physically remove the CP-168U board from the PCI or PCI-X slot. The next time you start up the PC, the system will automatically remove the configuration. There is no need to click the Remove button in the Moxa Smartio/Industio Configuration Panel dialog box.

Updating the Driver

Take the following steps to update the Smartio CP-168U board driver.

1.Open [Control Panel], click on the [Network] icon, and select the [Adapters] tab.

2.Click on MOXA Smartio/Industio Family Adapter from the Network Adapter list.

3.Click the [Remove] button in the Network dialog box.

Smartio CP-168U User’s Manual 3-41