Installing the Software and Drivers on a Windows Computer
4.Read the License Agreement and select “I accept the terms in the license agreement” to agree to the terms. Click Next. (A series of dialog boxes guides you through the installation.)
5.Use the Next and Back buttons to navigate through the wizard.
6.In the Installation Complete! window, click Finish.
Installing the Drivers
To install the drivers:
1.If your USB modem has not yet been activated, ensure you are in the network coverage area (not roaming).
2.Run Sprint Connection Manager.
[ 
] on your desktop.)
3.Wait for Sprint Connection Manager to start up and display “No device...”.
4.Slide the front panel off the USB modem.
5.Hold the battery so that the side with two white arrows faces up and the gold contact points on the end of the battery line up with the gold contact points on the USB modem. Insert the battery into the USB modem.
Warning:
To avoid the risk of explosion, use the same battery model when replacing the battery. Properly dispose of the used battery.
6.Slide the front panel onto the USB modem until the panel clicks into place.
7.Slide the lever on the bottom of the USB modem in the direction indicated by the triangle to release the USB modem’s USB connector.
4