TOA Electronics 595U Center Manage Network Connections, Dial-Up Connections, Select Properties

Basics of Your USB Modem (Windows)

Problem/	Solution
error
Cannot	If the connection is dropped as soon as it is established:
connect	 Charge the battery for at least 30 minutes if the PWR LED is
to the		red. (If the connection still gets dropped as soon as it is
network		established, continue with the following steps.)
		– or –
	1.	Select
		(Windows Vista) Start > Control Panel > Network and Sharing
		Center > Manage Network Connections.
		(Windows XP) Start > Control Panel > Network Connections.
		(Windows 2000) Start > Settings > Control Panel > Network
		and Dial-Up Connections.
	2.	Right-clickSprint Mobile Broadband - Sierra Wireless, and
		select Properties.
	3.	Select
		(Windows Vista) Options, and select PPP Settings.
		(Windows XP or Windows 2000) Networking tab, and select
		Settings.
	4.	Ensure that “Enable LCP Extensions” is selected and
		“Negotiate multi-link for single link connections” is not
		selected.
	5.	Click OK.
The PWR LED	This situation may occur under extreme usage conditions when
goes off, then	you’re transmitting data in a coverage area with a weak signal.
	1. Wait until the PWR LED turns green.
on, and stays
red	2.	Resume your connection.
	 If the PWR LED still goes off, and then comes on again and
		stays red, charge the battery for at least 30 minutes.

22