Sun Microsystems 820-4733-10 service manual Inserting Pins, 11Using Pliers to Pull a Pin

FIGURE 2-11Using Pliers to Pull a Pin

4.In one motion, use both hands to pull the pin out of the connector.

5.Dispose of the pin.

▼Inserting Pins

When inserting pins, work from the top down. Repeat Step 1 through Step 5 for each pin that needs to be inserted.

1.Ready the Molex tool for a pin insertion.

a.Press the trigger on the Molex tool to release the ejector.

b.Slide a pin into the opening. A portion of the pin protrudes.

c.Activate the lock to grasp the pin.

2.Position the Molex tool over the hole in the connector where you want to insert the pin.

3.Holding the Molex tool perpendicular to the plane of the connector, insert the pin into the connector.

2-14Sun Datacenter Switch 3456 Service Manual • August 2008