Sun Microsystems 820-4733-10 service manual 2Installing and Securing the CMC

4.Carefully slide the CMC into the chassis until the release levers move.

See FIGURE 5-2.

FIGURE 5-2Installing and Securing the CMC

5.Swing the release levers inward to secure the CMC into the chassis.

See FIGURE 5-2.

6.Reconnect the cables you removed previously to the front panel.

7.Configure the new CMC.

See the Sun Datacenter Switch 3456 Installation Guide or Sun Datacenter Switch 3456 Administration Guide.

8.If you used the clia switchover command when you removed the CMC, use command again to transfer back control to the new CMC.

Chapter 5 Chassis Management Controller Service Procedures 5-5