Sun Microsystems 820-4733-10 service manual Installing Power Supplies, Installing a Power Supply

3.4Installing Power Supplies

▼Installing a Power Supply

1.Unwrap the replacement power supply from its antistatic packaging.

2.Swing open the release lever.

3.Orient the power supply with the handle on the left and the receptacle on the right.

4.Slide the power supply into the open slot, pushing the power supply in until the release lever moves.

See FIGURE 3-4.

FIGURE 3-4Installing the Power Supply

5.Swing the release lever to the left to secure the power supply into the chassis.

See FIGURE 3-5.

Chapter 3 Power Supply Service Procedures 3-5