Network Technologies Initialize Serimux Console Switch to default settings, Using the Keypad

Page 31
To attach a modem Action (from Keypad)
1. Press DISCON
2. Press DISCON again
3. Press 1
4. Press PORT
5. Enter the port number
6. Press ENTER
The administrator can view any changes in port connections made from the keypad by opening the terminal program on any terminal connected to a user port and view the “Port list” (see page 8).
¾ Disconnect 2 ports
Action (from Keypad)
1. Press DISCON
2. Enter the port number
3. Press ENTER
NTI SERIMUX SERIES CONSOLE SWITCH

Reaction of SERIMUX

- The LED “Discon” will illuminate.

-The port 0 LED will be illuminated, the other port LEDs will be OFF.

- The corresponding port LED will illuminate, the other port LEDs will be OFF.

- The data traffic between any remaining linked ports (if any) will be indicated by the corresponding LEDs.

¾Attach or detach a modem

Reaction of SERIMUX

- The LED “Discon” will illuminate.

-The port 0 LED will be illuminated, the other port LEDs will be OFF.

- The LED “Discon” will illuminate.

-The port 0 LED will be illuminated, the other port LEDs will be OFF.

-

-

- The corresponding port LED will illuminate. The other port LEDs will be OFF.

- The data traffic between any remaining linked ports (if any) will be indicated by the corresponding LEDs.

The modem will be initialized and connected if a modem is connected to the specified port and powered ON. The administrator can verify this by viewing the Port list (see page 8).

To detach a modem

Action (from Keypad)

Reaction of SERIMUX

1.

Press DISCON

- The LED “Discon” will illuminate.

 

 

- The port 0 LED will be illuminated, the other port LEDs will be OFF.

2.

Press DISCON again

- The LED “Discon” will illuminate.

 

 

- The port 0 LED will be illuminated, the other port LEDs will be OFF.

3.

Press 0

-

4.

Press PORT

-

5.

Enter the port number

- The corresponding port LED will illuminate. The other port LEDs will be OFF.

6.

Press ENTER

- The data traffic between any remaining linked ports (if any) will be indicated by the

 

 

corresponding LEDs.

Initialize SERIMUX Console Switch to default settings

SERIMUX can be reset to default settings either by using the Keypad, or the "RESET" button

Using the Keypad

This procedure is only necessary if the administrator is unable to access the administrator main menu. This should only occur if an administrator password has been set and the password is not known.

The SERIMUX should be OFF before beginning this procedure.

1.Press and hold both local keypad “1” and “6” buttons.

2.Turn ON the SERIMUX.

3.Wait 3 seconds.

4.Release the buttons.

Caution: During initialization, the customer modified parameter values will be replaced with the factory default values (for default values, see page 31, Appendix A); user names and passwords will return to default values.

27

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Console Switch Trademark Table of Contents Table of Figures Materials Supplied with this kit Also supplied with units having RJ45 connectorsIntroduction MaterialsDefinitions Serial Interface SpecificationsRear View of Serimux Features and FunctionsCable Connections InstallationRJ45 Male Connector Rack mounting InstructionsSerimux Quick Start Initial StartupSerial Control Using the Serimux Console SwitchSerial Control Root all capital lettersLogin as the administrator Administrator ControlsPort list displays the status of all ports Port ListPort settings menu Port SettingsSetting Description Value Port serial settings DTR line behavior Inter-character delayFlow control Command Xon or Xoff CharactersCopy Port Serial Settings Modem settingsDisplay serial settings for different port number Port data buffer Display modem settings for different port numberUser List User ListUser settings menu User SettingsCopy User Settings Port accessChange administrator password Advanced SettingsLoad new firmware Save current firmware FirmwareUser Controls User Accessible host list screenUser main menu User with limited host port accessPort List screen Limited user accessible Port list¾ Connect to port User Terse modeTerse mode commands ¾ Accessible host listFunctions of the Keypad ¾ Verbose mode¾ Login the administrator Keypad Control¾ Login user to a port ¾ Login a user to the administrator main menu¾ Connect 2 host ports ¾ Disconnect and logout a userAction from Keypad To detach a modem Initialize Serimux Console Switch to default settingsUsing the Keypad ¾ Attach or detach a modemUsing The Reset Button Firmware UpgradeNew firmware upload window Troubleshooting Interconnection Cable Wiring MethodUsers Appendix a Serimux Port CharacteristicsAppendix B Serimux User and Administrator Characteristics AdministratorRJ45 Signal RJ45 Signal DB-25MAppendix C- Cable Adapters RJ45 Signal DB-25F Ethernet Pinouts SpecificationsWarranty Information Index
Top Page Image Contents