Network Technologies Console Switch operation manual User Settings, User settings menu

Page 20

NTI SERIMUX SERIES CONSOLE SWITCH

User Settings

From the "Administrator main menu", press [5], enter the user index number, then press [Enter]. The screen will show the current user number and name and the user settings menu:

Figure 12- User settings menu

	Setting			Description			Value
	Setting			Description			Value
	User name			Change the user name			Max. 15 characters, use backspace to delete
	Password			Define the user password, if any			Max. 31 characters, use backspace to delete
	User enabled			Enable or disable user			Y to enable, any other character to disable
	User menu timeout			Time interval of user inactivity			0-90 minutes 0 = never
				before auto logout of the user will
				occur
	Administrator			Enable administrative privileges for			Y to enable, any other character to disable
	privileges			user
	Port access			Define ports user has access to.			1 + port number to grant access to a port
				Displays user's Port access list			0 + port number to deny access to a port
				(Fig.12)			< or > to change to different user access list
	User initial screen			Select the initial user menu to			M = User main menu
				display upon user login			H = Accessible host list
							T = Terse mode
	Reset user settings			Restores factory default user			A confirmation "Y"	will be required
	to default			settings
	- When selecting each new user setting values, press [Esc] or [Spacebar] to cancel,							or press [Enter] to save.

-Press [>] to display the current settings for the next port.

-Press [<] to display the current settings for the previous port

-Press [Esc] or [Spacebar] to return to the Administrator main menu

16

Image 20

Contents Console Switch Trademark Table of Contents Table of Figures Also supplied with units having RJ45 connectors IntroductionMaterials Materials Supplied with this kitSerial Interface Specifications DefinitionsFeatures and Functions Rear View of SerimuxInstallation RJ45 Male ConnectorRack mounting Instructions Cable ConnectionsInitial Startup Serimux Quick StartUsing the Serimux Console Switch Serial ControlRoot all capital letters Serial ControlAdministrator Controls Login as the administratorPort List Port list displays the status of all portsPort Settings Port settings menuSetting Description Value Port serial settings Inter-character delay Flow control CommandXon or Xoff Characters DTR line behaviorDisplay serial settings for different port number Modem settingsCopy Port Serial Settings Display modem settings for different port number Port data bufferUser List User ListUser Settings User settings menuPort access Copy User SettingsAdvanced Settings Change administrator passwordFirmware Load new firmware Save current firmwareUser Accessible host list screen User ControlsUser with limited host port access User main menuLimited user accessible Port list Port List screenUser Terse mode Terse mode commands¾ Accessible host list ¾ Connect to port¾ Verbose mode ¾ Login the administratorKeypad Control Functions of the Keypad¾ Login a user to the administrator main menu ¾ Login user to a portAction from Keypad ¾ Disconnect and logout a user¾ Connect 2 host ports Initialize Serimux Console Switch to default settings Using the Keypad¾ Attach or detach a modem To detach a modemFirmware Upgrade Using The Reset ButtonNew firmware upload window Interconnection Cable Wiring Method TroubleshootingAppendix a Serimux Port Characteristics Appendix B Serimux User and Administrator CharacteristicsAdministrator UsersAppendix C- Cable Adapters RJ45 Signal DB-25MRJ45 Signal RJ45 Signal DB-25F Specifications Warranty InformationIndex Ethernet Pinouts