Philips HTS5000W Connecting to TV, Option 1 Using Scart socket, Option 2 Using S-Video socket

E n g l i s h

Basic Connections (continued)

Step 5: Connecting to TV

WIRELESS REAR SPEAKER ANTENNA

OUT	IN
VIDEO	TV
AUDIO

OROR

Pr	Y
L
	Pb
R

IMPORTANT!

–You only need to make one video connection from the following options, depending on the capabilities of your TV.

–Connect the DVD system directly to the TV.

–Proceed to page 20 for setting up the TV once you have completed the connections.

Helpful Hints:

–To hear the TV channels through this DVD system, use the audio cables (white/red - not supplied) to connect AUX IN sockets to the corresponding AUDIO OUT sockets on the TV (not required if you are using Scart connection).

–Scart (RGB) Video provides better picture quality than Composite Video.

Option 1: Using Scart socket

●Use the supplied scart video cable (black) to connect the DVD system’s SCART socket to the corresponding Scart input socket on the TV.

OR

Option 2: Using S-Video socket

●Use an S-video cable (not supplied) to connect the DVD system’s S-VIDEOsocket to the S-Video input socket (or labelled as Y/C or S-VHS) on the TV.

OR

Option 3: Using Composite Video socket

●Use a composite video cable (yellow - not supplied) to connect the DVD system’s CVBS socket to the video input socket (or labelled as A/V In,Video In, Composite or Baseband) on the TV.

12

001-051-hts5x-01-Eng50 12 17/05/05, 1:18 PM 3139 115 23842