Playback
Playing pictures or audio files from USB flash drive or USB memory card reader
This DVD system able to access and view the data (JPEG, MP3 or Windows Media™ Audio) in the USB flash drive or USB memory card reader.
The USB function can only be activated in DISC mode.
1Insert a USB flash drive or USB memory card reader into the USB port on the front panel.
➜ A message will appear on the TV for 5 seconds when the device is detected.
Press MODE key to select device
2Press USB MODE on the remote control to access the data in the drive. ➜ The content menu appears on the TV.
During playback, you can;
●Press DISC or USB MODE on the remote control to return to DISC mode.
●Press Ç before removing the USB flash drive or USB memory card reader from the slot.
Compatibility of USB device
●The USB port does not support the connection of other USB devices except USB flash drive or USB memory card readers.
●The USB port only supports the playback of JPEG/MP3/Windows Media™ Audio files.
●It is not possible to record from the data from USB port to this DVD system.
●Copy protected contents are not playable.
E n g l i s h
Select device:
Device 1
Device 2
Device 3
Device 4
Device 5
Device 6
Disc
●Use 3 4 to navigate within the menu and select the device you want to access, then press OK.
●The device number appear may vary from different card readers.
●For card readers, the number of devices available for selection depends on the number of cards inserted.
TIPS: Some discs cannot be played on this DVD system due to the configuration and characteristics of the disc, or due to the condition of recording and authoring software that was used.
29
29 | 17/05/05, 1:19 PM 3139 115 23842 |