Philips HTS5000W Accessing Audio Setup, CD Upsampling, 88.2 kHz, Speakers Volume/Speakers Delay

DVD Setup Menu Options (continued)

E n g l i s h

Accessing Audio Setup Page

1Press DISC and followed by SETUP on the remote.

2Use 1 2 keys to select ‘Audio Setup Page’.

3Press OK to confirm.

Audio Setup Page

Speakers Volume

Speakers Delay

Night Mode

CD Upsampling

CD Upsampling

This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality.

If you have activated the CD upsampling, the system will automatically switch to stereo mode.

1In ‘Audio Setup Page’, use 34 keys to highlight { CD Upsampling }, then press 2.

{Off }

Select this to disable CD-upsampling.

{88.2 kHz (X2) }

Select this to convert the sampling rate of the CDs twice higher than the original.

Speakers Volume/Speakers Delay

These menus contain speaker setup options that allow you to adjust the individual speakers volume and distance. For details, see page 44.

Night Mode - turning on/off

When the night mode is activated, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching action movies without disturbing others at night.

1In ‘Audio Setup Page’, use 34 keys to highlight { Night Mode }, then press 2.

{On }

Select this to level out the volume.

{Off }

Select this when you want to enjoy the surround sound with its full dynamic range.

2Use 34 keys to select a setting and press OK to confirm.

2Use 34 keys to select a setting and press OK to confirm.

Helpful Hint:

– If you press SURR button on the remote control to select “Multi-Channel” mode, it will disable the CD upsampling feature.

TIPS: The underlined option is the factory default setting.

To return to the previous menu, press 1. To remove the menu, press SETUP.

36

001-051-hts5x-01-Eng50 36 17/05/05, 1:19 PM 3139 115 23842